Kenwood TM-V7E User Manual download pdf (Page 36)

100

STORING DATA IN SIMPLEX CHANNELS

1 Select the desired band.

2 Select the desired frequency and related data (Tone,

CTCSS, DTSS, etc.) using VFO mode, Memory Recall

{page 31}, or the Call channel {page 33}.

3 Press

[F]

•A memory channel number and an arrow appear.

• The arrow shows whether the current memory channel

contains data ("

s") or not ("

u").

4 Turn the Tuning control, or press Mic [UP]/[DWN], to

select the desired memory channel.

5 Press [MR].

• The selected frequency and related data are stored in the

memory channel. The transmit frequency from a split

memory channel or split Call channel is not stored.

• If the memory channel selected in the previous step

already contained data, the new data overwrites the

previous data.

STORING DATA IN SPLIT CHANNELS

1 To select the desired receive frequency, related data

and memory channel, use steps 1 to 4 (not 5) given for

Simplex Memory Channels.

2 Press [MR] (1 s).

•" ± " appears.

3 Select the desired transmit frequency.

4 Press [MR].

• The selected transmit frequency is stored in the memory

channel.

Note:

◆

If you select an offset direction in step 1, you can also press

[REV]

step 3 to select a transmit frequency. The transmit frequency

separated by the current offset frequency will be stored in the

memory channel.

◆

In step 2 you cannot use Mic

[MR]

, or Mic

[PF]

programmed with

Memory Recall.

◆

Transmit Offset status and Reverse status are not stored in a split

memory channel.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Comments to this Manuals

No comments

Kenwood TM-V7E User Manual Page 36

Comments to this Manuals

Related products and manuals for Acoustics Kenwood TM-V7E