Kenwood TM-V7E User Manual download pdf (Page 79)

100

To assign a function unavailable using the front panel keys:

1 Press [MNU] to enter Menu mode.

2 Select Menu No. 16 (Microphone).

3 Press

[

]

, then select Item No. 2 (PF 1) to No. 5 (PF4).

4 Press

[SET]

to select the desired function.

• Each time you press

[SET]

, the selection changes as

shown below:

User Setting ➞ Monitor ➞ Enter ➞ Voice ➞ PWR switch

(PF 1 only) ➞ 1750 Hz Tone (TM-V7E only)

5 Press [MNU] again to exit Menu mode.

User Setting:

Selects the front panel key function you assigned

{page72}.

Monitor:

Makes the squelch open and allows you to monitor activity

on the current frequency. This function is useful when

adjusting the volume or when receiving weak signals.

• Pressing the re-programmed Mic key toggles Monitor ON or

OFF.

• Scan will not function if Monitor is ON (squelch open).

Enter:

Allows you to enter digits from the MC-53DM microphone.

Refer to "KEYPAD DIRECT ENTRY" {page 74}.

Voice:

Activates or deactivates the function that announces the

current Control band frequency using beeps of different

frequencies. Press any key to stop beeps.

(POWER) switch:

Turns the transceiver ON or OFF. This function can be

assigned only to PF 1.

1750 Hz Tone (TM-V7E only):

After releasing the re-programmed Mic key with Transmit

Hold ON, the transceiver remains in the transmit mode for

2 seconds; a 1750 Hz tone is not continuously transmitted

for 2 seconds. A 1750 Hz tone is continuously transmitted

only while the re-programmed Mic key is being held.

•You can also use Transmit Hold to continuously send a

1750Hz tone for 2 seconds after releasing the

re-programmed Mic key. To activate this function, access item

No. 3 (1750 Hz Timer) in Menu No. 5 (Repeater).

VOL SQL

CALL

VOL SQL

CALL

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 99 100

Comments to this Manuals

No comments

Kenwood TM-V7E User Manual Page 79

Comments to this Manuals

Related products and manuals for Acoustics Kenwood TM-V7E