Kenwood TM-V7E User Manual download pdf (Page 95)

89

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

Problem

Probable Cause

Corrective Action

Page

Ref.

The electrical contacts on the front

panel and main unit were soiled.

The supply voltage is too low.

Memory Recall or the Call channel

was selected.

1 One of the Lock functions is ON.

2 The front panel was not

connected securely to the main

unit of the transceiver.

1 No data has been stored in any

memory channels, or stored data

was erased by Full Reset.

2 The Call channel was selected.

The way the transceiver

functions or displays

information is strange.

The display is too dim,

even though you selected

a high dimmer level.

The frequency cannot be

selected by turning the

Tuning control or by

pressing Mic [UP]/[DWN].

Most buttons/keys and the

Tuning control do not

function.

Memory channels cannot

be selected by turning the

Tuning control or by

pressing Mic [UP]/[DWN]

when using Memory

Recall.

Clean the electrical contacts on both the front

panel and the main unit using a clean damp

cloth.

The supply voltage requirement is

13.8 V DC ± 15% (11.7 V to 15.8 V DC).

If the input voltage is outside this range,

recharge your battery, adjust your regulated

power supply, and/or check all power cable

connections.

Press [VFO].

1 Unlock all of the Lock functions.

2 Separate the front panel from the main unit

by using the release switch on the rear of

the front panel, then lock the front panel

securely to the main unit by using the same

switch.

1 Store data in some memory channels.

2 Press [MR] to switch to Memory Recall.

—

3, 4

8

67

84

30

31

Continued

1 2 ... 90 91 92 93 94 95 96 97 98 99 100

Comments to this Manuals

No comments