Kenwood TM-V7E User Manual download pdf (Page 61)

100

CALLING

Note:

Before making a call, store your Station code in channel A, and

store the desired Station codes or Group codes in channels 1 to 5.

1 Select the desired band.

2 Tune to the prearranged frequency.

3 Press

[F], [DTSS]

twice to switch Page ON.

•"PAG" appears.

• If DTSS is already ON, press this key combination once.

4 Press

[F] (1 s), [C.SEL]

5 Turn the Tuning control, or press Mic [UP]/[DWN], to

select the channel that contains the desired Station

code or Group code.

6 Press

[OFF]

or Mic [PTT] to restore the frequency

display.

7 Press and hold Mic [PTT].

• The selected Station code or Group code is transmitted

along with your Station code.

8 To switch Page OFF, press

[F], [DTSS]

Note:

◆

Each time you press

[PTT]

, the microphone is inhibited and the Page

code is transmitted. After establishing a contact, you can eliminate

this pause by switching Page OFF.

◆

When recalling either a memory channel or the Call channel with

DTSS status ON while using the VFO with Page switched ON, page

is given priority.

RECEIVING

1 Select the desired band, and tune to the prearranged

frequency.

2 Switch Page ON.

3 You are ready to receive a call.

• When your transceiver receives a signal encoded with

your Station code or a Group code, the squelch opens, an

alert sounds, and "PAG" blinks.

• If you are called with your Station code, the display shows

the calling station’s code.

• If called with the Group code, the display shows the group

code.

4 To respond to the calling station, press Mic [PTT] while

the Page code is visible on the display.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 99 100

Comments to this Manuals

No comments

Kenwood TM-V7E User Manual Page 61

Comments to this Manuals

Related products and manuals for Acoustics Kenwood TM-V7E