Kenwood TM-V7E User Manual download pdf (Page 52)

PROGRAM SCAN

Program Scan is similar to VFO Scan except that you

select the frequency range of the scan.

■ Setting Scan Limits

You can store up to three scan ranges on each band,

using memory channels L1/U1, L2/U2, and L3/U3.

1 Select the desired band.

2 Turn the Tuning control, or press Mic [UP]/[DWN],

to display the desired lower limit.

3 Press

[F]

4 Turn the Tuning control, or press Mic [UP]/[DWN],

to select channel L1, L2, or L3.

5 Press [MR].

• The lower limit is stored in the channel.

6 Turn the Tuning control, or press Mic [UP]/[DWN],

to display the desired upper limit.

7 Press

[F]

8 Turn the Tuning control, or press Mic [UP]/[DWN],

to select channel U1, U2, or U3.

• If you have selected for example L1 in step 4,

selectU1.

9 Press [MR].

• The upper limit is stored in the channel.

10 To confirm the stored scan limits, press [MR], then

select the L and U channels.

Note:

◆

The lower limit must be lower in frequency than the upper limit.

◆

The lower and upper frequency steps must be equal.

◆

The lower and upper limits must be selected on the same band.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 99 100

No comments

Kenwood TM-V7E User Manual Page 52