Kenwood TM-V7E User Manual download pdf (Page 56)

100

DUAL TONE SQUELCH SYSTEM (DTSS)

DTSS provides a more refined method than CTCSS to

selectively communicate with specific stations. The squelch

on the transceiver opens only when the same 3-digit DTMF

(Dual Tone Multi-Frequency) code is received that is

programmed in this transceiver. You can select a 3-digit

code from among 1000 combinations, 000 to 999.

Note:

◆

Be aware that audible DTMF tones from other transceivers near you

may be picked up by your MC-53DM or MC-45 microphone. If so,

this could prevent the functions described in this chapter from working

correctly.

◆

DTSS does not function while you are storing DTSS codes even if a

code is received that matches one already stored in memory.

STORING DTSS CODES

1 Select the desired band.

2 Press

[F], [DTSS]

to switch the DTSS function ON.

• "DT" appears.

3 Press

[F] (1 s), [C.SEL]

• The current DTSS code appears with the first digit

blinking. The default is 000.

4 Use the Tuning control or Mic [UP]/[DWN] to select the

first digit.

• When using the MC-53DM microphone, you can select

three digits by simply pressing numeric keys in sequence.

5 Press

[

]

• The second digit blinks.

6 Repeat Steps 4 and 5 to select the second and third

digits.

7 To switch the DTSS function OFF, repeat pressing

[F]

[DTSS]

twice.

Note:

The selected DTSS code also can be stored in a memory channel

or the Call channel.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 99 100

Comments to this Manuals

No comments

Kenwood TM-V7E User Manual Page 56

Comments to this Manuals

Related products and manuals for Acoustics Kenwood TM-V7E