Kenwood TM-V7E User Manual download pdf (Page 85)

100

PACKET OPERATION

Connect this transceiver to your personal computer via a

Terminal Node Controller (TNC) {page 6}. You can send

Email to far away stations or obtain a variety of information

via your local bulletin boards, or you may enjoy other

Packet applications. Reference material for starting Packet

operation should be available at any store that handles

Amateur Radio equipment.

ACTIVATING DATA TX/RX BAND

If you prefer, you can send or receive data using a RX-only

band where “PTT” is invisible. The band with “PTT” is used

for voice communications.

1 Press [MNU] to enter Menu mode.

2 Select Menu No. 15 (Data Transfer).

3 Press

[

]

, then select Item No. 2 (Data Band).

4 Press

[SET]

to toggle the function ON or OFF (default).

5 Press [MNU] again to exit Menu mode.

• “-Data-” appears for the Data TX/RX band.

1200/ 9600 bps OPERATION

Select 1200 bps or 9600 bps for the data transfer rate,

depending on the type of your TNC.

1200 bps:

The Transmit data input (PKD) sensitivity is 40 mV

P-P

, and

the input impedance is 10 kΩ. This is suitable for a typical

1200 bps TNC.

9600 bps:

The Transmit data input (PKD) sensitivity is 2 V

P-P

, and the

input impedance is 10 kΩ. This is suitable for most

9600bps TNCs. Select 9600 bps if using a TNC with dual

speed capability that only has a 2 V

P-P

output.

1 Press [MNU] to enter Menu mode.

2 Select Menu No. 15 (Data Transfer).

3 Press

[

]

, then select Item No. 1 (Data Speed).

4 Press

[SET]

to toggle 1200 bps (default) or 9600 bps.

5 Press [MNU] again to exit Menu mode.

VOL SQL

CALL

VOL SQL

CALL

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

Comments to this Manuals

No comments

Kenwood TM-V7E User Manual Page 85

Comments to this Manuals

Related products and manuals for Acoustics Kenwood TM-V7E