Kenwood TM-V7E User Manual download pdf (Page 39)

100

CALL CHANNEL

The Call channel can be used to store any frequency and

related data that you will recall often. The Call channel can

be programmed with a simplex or split frequency as well as

related data that can be stored in the memory channels.

No matter what mode the transceiver is in, the Call channel

can always be selected quickly. You may want to dedicate

the Call channel as an emergency channel within your

group. In this case, the Call/VFO scan {page 48} will be

useful.

The default frequency stored in the Call channel is shown

below:

The contents of the Call channel cannot be deleted;

however, you can overwrite old data with new data as

described in the next section.

■ Recalling the Call Channel

1 Select the desired band.

2 Press [CALL] to recall the Call channel.

• "CALL" appears.

•To restore the previous mode, press [CALL] again.

• The Tuning control and microphone [UP]/[DWN] do

not function while the Call channel is selected.

■ Changing Call Channel Contents (Simplex)

1 Select the desired band.

2 Select the desired frequency and related data

(Tone,CTCSS, DTSS, etc.) using VFO mode or

Memory Recall {page 31}.

3 Press

[F]

, [CALL].

• The selected frequency and related data are stored in

the Call channel. The transmit frequency from a split

memory channel is not stored.

• The previous mode is restored.

Note:

Lockout status is not copied from a memory channel to the

Call channel.

440 MHz

430 MHz

Version UHF

VHF

144 MHz

U.S.A/ Canada

Europe/ General

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 99 100

Comments to this Manuals

No comments

Kenwood TM-V7E User Manual Page 39

Comments to this Manuals

Related products and manuals for Acoustics Kenwood TM-V7E