Kenwood TM-V7E User Manual download pdf (Page 81)

■ Memory Channel Number Entry

1 Select the desired band.

2 Press [MR] to enter Memory Recall mode.

3 Press the Mic key re-programmed with Enter.

• "– –" or "– – –" appears depending on the number of

memory channels available on the current band.

4 Use the Mic keypad to enter 2 or 3 digits.

•To recall channel 3, for example, enter "03" or "003".

• If you press any key other than [0] ~ [9], or if you do

not make the next entry within 10 seconds, the

previous frequency display will be restored.

• If you enter a memory channel that does not contain

data, an error beep sounds.

■ Tone Frequency Number Entry

1 Select the desired band.

2 Press

[TONE]

to activate the Tone function.

3 Press

[F] (1 s), [T.SEL]

• The current tone frequency appears.

4 Press the Mic key re-programmed with Enter.

• "– –" appears.

5 Use the Mic keypad to enter the Tone No.

corresponding to the desired tone frequency.

• Consult the table given in "Selecting a Tone

Frequency" {page 25} to find out how the Tone Nos.

correspond to the tone frequencies.

•To select Tone No. 3 (74.4 Hz), for example, enter

"03".

• If you press any key other than [0] ~ [9], or if you do

not make the next entry within 10 seconds, the

previous frequency display will be restored.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 99 100

No comments

Kenwood TM-V7E User Manual Page 81