Kenwood TM-V7E User Manual download pdf (Page 23)

100

SELECTING FREQUENCIES

■ Tuning Control

Using the Tuning control is convenient when you are

within easy reach of the transceiver front panel, and the

frequencies to be selected lie near the current

frequency.

1 Press [VFO] to select VFO mode.

2 Turn the Tuning control to select a receive

frequency.

• Clockwise rotation increases the frequency one

frequency step at a time.

• Counterclockwise rotation decreases the frequency

one step at a time.

•To change frequencies in steps of 1 MHz, press [MHz]

first. Pressing [MHz] again cancels the 1 MHz

function. To change in steps of 10 MHz, press

[F]

+[MHz] first. Pressing

[F]

cancels the 10 MHz

function; pressing [MHz] starts the 1 MHz function.

• If you cannot select a particular receive frequency, the

frequency step size needs to be changed. See

"CHANGING FREQUENCY STEP SIZE" {page 65} for

further information.

•You can also select frequencies via the microphone

keypad (MC-53DM only). See "KEYPAD DIRECT

ENTRY" {page 74}.

■ Microphone [UP]/[DWN] Buttons

Using Mic [UP]/[DWN] for frequency selection is useful

when mobiling or any time you are not immediately in

front of the transceiver.

Press [UP] or [DWN] once to change the receive

frequency by one frequency step in the direction

indicated by the button.

• Pressing and holding either button causes the frequency

to step repeatedly in one direction until the button is

released.

•To change frequencies in steps of 1 MHz (or 10 MHz),

press [MHz] (or

[F]

+ [MHz]) first.

VOL SQL

CALL

VOL SQL

CALL

MC-53DM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

Comments to this Manuals

No comments

Kenwood TM-V7E User Manual Page 23

Comments to this Manuals

Related products and manuals for Acoustics Kenwood TM-V7E