Kenwood TM-V7E User Manual download pdf (Page 90)

INSTALLING OPTIONS

INSTALLING THE VS-3 VOICE SYNTHESIZER UNIT

CAUTION:

ALWAYS SWITCH OFF THE POWER AND UNPLUG THE

DC POWER CABLE FIRST.

1 Remove the five screws from the upper cover of the

transceiver.

2 Hold the VS-3 unit with the component side facing

inward, and insert the VS-3 connector into the

corresponding transceiver connector.

3 Replace the upper cover (5 screws).

KENWOOD

FM DUAL BANDER TM-V7

KENWOOD

-V

INSTALLING A DETACHABLE FRONT PANEL KIT

(DFK-3C/ DFK-4C/ DFK-7C)

CAUTION:

ALWAYS SWITCH OFF THE POWER AND UNPLUG THE

DC POWER CABLE FIRST.

1 While sliding the spring-loaded release switch on the

rear of the front panel, remove the front panel from the

main unit.

• Be careful not to drop the front panel when releasing it.

2 Hang the connector of the connectorized front panel

cable onto the catch on the main unit, and secure the

connector using the supplied screw.

• If the screw is loose, the transceiver may not function

properly.

Release switch

KENWOOD

L B

-V

Component side

Viewed with the front

panel removed

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 99 100

No comments

Kenwood TM-V7E User Manual Page 90