Kenwood NX-800E User Manual download pdf (Page 6)

PrecauTions

Observethefollowingprecautionstopreventre,personalinjury,andtransceiver

damage.

• Donotattempttocongurethetransceiverwhiledriving;itistoodangerous.

• Do not disassemble or modify the transceiver for any reason.

• Do not expose the transceiver to long periods of direct sunlight, nor place it near heating

appliances.

• If an abnormal odor or smoke is detected coming from the transceiver, switch the

transceiver power off immediately, and contact your

Kenwood dealer.

• Useofthetransceiverwhileyouaredrivingmaybeagainsttrafclaws.Pleasecheck

and observe the vehicle regulations in your area.

• Donotuseoptionsnotspeciedby

Kenwood.

◆ The transceiver operates in 12 V negative ground systems only! Check the battery polarity and

voltage of the vehicle before installing the transceiver.

◆ Use only a Kenwood optional DC power cable.

◆ Donotcutand/orremovethefuseholderontheDCpowercable.

For passenger safety, install the transceiver securely using an optional mounting bracket and screw

set so the transceiver will not break loose in the event of a collision.

1 2 3 4 5 6 7 8 9 10 11 ... 30 31

No comments

Kenwood NX-800E User Manual Page 6