Kenwood NX-800E User Manual download pdf (Page 26)

SignAling

■ Quiet Talk (QT)/ Digital Quiet Talk (DQT)

Your dealer may have programmed QT or DQT signaling on your transceiver

channels. A QT tone/ DQT code is a sub-audible tone/code which allows you

to ignore (not hear) calls from other parties who are using the same channel.

Operator Selectable Tone (OST)

If a key has been programmed with

OST, you can reprogram the QT/DQT

settings on each of your channels.

1 Select your desired channel.

2 Press and hold the key programmed as OST for 1 second.

3 Press / to select your desired tone or code.

• Your dealer can set up to 40 tones/codes.

4 Press to save your new setting.

5 When you have nished operating using OST, press the OST key again to

turn the OST function OFF.

■ Radio Access Number (RAN)

RAN is a new signaling system designed for digital radio communications.

When a channel is set up with a RAN, squelch will only open when a call

containing a matching RAN is received. If a call containing a different RAN

is made on the same channel you are using, you will not hear the call. This

allows you to ignore (not hear) calls from other parties who are using the same

channel.

■ Optional Signaling

Your dealer may also program several types of option signaling for your

transceiver channels.

2-tone Signaling:

2-tone Signaling opens the squelch only when your

transceiver receives a call containing matching 2 tones.

DTMF Signaling:

DTMF Signaling opens the squelch only when the

transceiver receives a call containing a matching DTMF code.

FleetSync Signaling:

Refer to “Selcall (Selective calling)” on page 14.

NXDN ID Signaling:

NXDN ID is an optional signaling system available only

for digital communications.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

No comments

Kenwood NX-800E User Manual Page 26