Kenwood NX-800E User Manual download pdf (Page 23)

3 Press / to select the station you want to call.

• If Manual Dialing is enabled, you can enter the station ID by using the

microphone keypad, or by using / . When using / , cycle through the digits

to select a digit, then press to set the digit and move the cursor to the right.

Repeat this process until the entire ID is entered.

4 Press to enter Status mode.

5 Press / to select the status you want to transmit.

• If Manual Dialing is enabled, you can enter the status ID by using the

microphone keypad, or by using / (refer to step 3, above).

6 Press the PTT switch or to initiate the call.

• “<<COMPLETE>>” appears on the display when the status has been

successfully transmitted.

■ Receiving

The icon will ash and a calling ID or text message will appear when a

Status call is received. Press any key to return to normal operation.

■ Reviewing Messages in the Stack Memory

1 Press the key programmed as Stack, or press and hold the key

programmed as Selcall, Status, or Selcall + Status to enter Stack mode.

• The last received message is displayed.

2 Press / to select the desired message.

• Message types are identied as follows:

I: Caller ID, S: Status Message, M: Short Message

• Press and hold

for 1 second to cycle the display information as follows:

ID Name > Status/Short Message > CH/GID > Time Stamp

3 Press to return to normal operation.

• To delete the selected message, press or #. To conrm the deletion, press

or .

• To delete all messages, press and hold

or # for 1 second. To conrm the

deletion, press or .

ShorT/long meSSAgeS

Received short messages are displayed the same as Status messages and are

stored in the same stack memory.

To send short messages, and to send and receive long messages, you must

connect the transceiver to a PC. Ask your dealer for details.

gpS reporT

To send your location data, you must rst connect a GPS unit to the transceiver.

GPS data can be manually transmitted by pressing the key programmed as Send

the GPS data, or by accessing the Menu {page 9}. If set up by your dealer, GPS

data may be automatically transmitted at a preset time interval.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

No comments

Kenwood NX-800E User Manual Page 23