Kenwood TM-441A User Manual download pdf (Page 56)

REMOTE CONTROLLER RC-10

To operate the transceiver with the RC-10 press and

hold the CALL key on the transceiver and then turn on

the POWER switch.

To select the CALL channel when using the RC-10 press

the F key on the RC-10 and then the VFO key.

Please refer to the Instructions provided with the RC-10

for a description of the other RC-10 functions.

Indicates the transmit/receive frequencies and other

conditions.

©Keyboard

Can be used to select the transmit/receive frequen

cies (0 to 9, AandT keys), to select memory channels

(1 to 10), and to select channel 11 or subsequent

channels during memory calling ( A and Vkeys).

®F (Function) key

The following functions can be controlled by combin

ing the F key with other keys.

F.l

F.2

F.3

F.4

F.5

F.7

F.8

F.O

F.VFO

ALT function is on (TM-541A/E only).

When the transceiver squelch is on, the

squelch is switched in or out each time this

key is pressed.

The shift can be switched to +, -, and sim

plex each time this key is pressed.

REV (reverse) is turned on and off each

time this key is pressed.

The TONE and CTCSS functions are turned

on and off each time this key is pressed.

The memory channel lockout is turned on

and off each time this key is pressed.

The RC-10 keys are locked and unlocked

each time this key is pressed.

Cotrols switching to duplex using two

transceivers.

The call channel is turned on and off each

time this key is pressed.

5 6

1 2 ... 51 52 53 54 55 56 57 58 59

Comments to this Manuals

No comments

Kenwood TM-441A User Manual Page 56

Comments to this Manuals

Related products and manuals for Boating Accessories Kenwood TM-441A