Kenwood TM-441A User Manual download pdf (Page 46)

stand by with group code

1. When a call is received with the group code, the

squelches of all the members of the group are

opened to enable reception.

When you are called with the group code, the

common group code and its memory channel

number are displayed.

(Example: Group code 789 is stored in channel 3.)

Group code Flashing

P183 -P:3

/ I \

-9

--------

OVER-

3 is displayed to indicate that the

station is being called.

2. When the PTT switch is pressed, group code 789 (as

displayed) and your station ID code are transmitted.

You can participate in the group-roundtable.

3. After the remote station has been called, cancel

paging mode.

Communication can be performed more efficiently.

5-10-5 Code Lockout

(A code is locked out only during reception with the

paging function.)

If an individual code is stored in P1,P2 or P3, reception is

enabled when the codes match, even if one local

station communicates with another. To use memories

PI to P3 for transmission only, lock out the memories.

When you are communicating with two or more groups

having the same frequency, lock out the group code

with which stand by is temporarily stopped.

• Paging memory lockout

1. Enter the code setting mode and display the number

(except memory 0 and A) to be locked out using the

tuning control.

2. Press the MR/M key.

★mark lights and the memory is locked out.

4 6

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 58 59

No comments

Kenwood TM-441A User Manual Page 46