Kenwood TM-441A User Manual download pdf (Page 27)

1. Adjust the SQL control to the threshold point.

2. Press and hold the MR/M key for longer than 1 sec

ond. The MHz indicator will flash as a visual reminder

the transceiver is scanning.

5-5-5 Memory Channel Scan

3. Scan will begin at the current memory channel and

proceed sequentially .i.e.Ml ^ M2 -> M3 etc. Only

those memory channels with data entered are

scanned.

4. Scan will stop whenever a signal is received (that ac

tivates the BUSY indicator) for a limited time.

5. Press the PTT switch or any front panel key to stop

scanning.

5-5-6 Memory Channel Lockout

The Memory Channel Lockout function allows you to

temporarily skip unwanted Memory Channels during

Memory Channel scan.

1. Press the MR/M key to select the Memory Channel

mode.

2. Select the Memory Channel that you wish to skip by

using the Tuning control or the microphone UP/DWN

switches.

3. Press the F key for longer than 1 second. The F indica

tor will flash. Within 10 seconds of pressing the F key

press the MR/M key. A star (★) will appear to the left

of the Memory Channel number . This indicates the

Memory Channel will be skipped during the Memory

Channel scan operation.,

1 second.

4. Repeat steps 2 and 3 to lock out any other Memory

Channel that you want to skip

5. To cancel the lockout , select the desired Memory

Channels as described in step 1,2,and 3 above.

The star (★) will go out. The Memory Channel will

now be scanned normally.

1 ... 26 27 28 ... 59

No comments

Kenwood TM-441A User Manual Page 27