Kenwood TM-441A User Manual download pdf (Page 38)

5. Only a signal with the proper CTCSS tone (if the TSU-

6 is installed ) will initiate recording. If no tone unit is

installed the recording will start whenever squelch

opens. (The alert function will not sound an alarm.)

The CTCSS, DTSS (only reception is possible even if

the DTMF unit is not installed), and paging functions

are available.

6. If the squelch is closed during recording in the

automatic recording mode, recording will finish at

the current phrase, and the next phrase will be

awaited even if there is recording time remaining.

(Recording will not be possible if there is no empty

phrase.

OLock canceling

If the third digit of the display is “1“, recording is

locked, and a new signal cannot be recorded in the

same phrase. If the third digit is “2“, recording and

playback are locked, and a new signal cannot be

recorded in the phrase and the phrase cannot be played

back.

To cancel the lock, press the REV/STEP key so that the

third digit become zero(O).

5-9-7 External Control of the DRS Function

(DTMF control mode)

The DRS function can be remotely controlled by an

external DTMF signal.

5-9-8 ID Number Seting

Select a four-digit number from 0000 to 9999.

1. Press the F key for longer than 1 second, then press

the DR/DT key while the F indicator is flashing. The

DRS setting mode will be entered and the DRS

indicator will light.

2. Press the MHz / LOCK key. Four digits will be

displayed, and the first digit will flash.

-----

■

---------------

»WOOD

(d v

. i

. '.

^ 'n.nnn

n ..

3. Set the first digit with the tuning control, then press

the MHz/LOCK key.

The second digit will flash.

3 8

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 58 59

Comments to this Manuals

No comments

Kenwood TM-441A User Manual Page 38

Comments to this Manuals

Related products and manuals for Boating Accessories Kenwood TM-441A