Kenwood TS-850S User Manual download pdf (Page 53)

When two TS-850 are connected together, operation data can be transferred from one TS-850S (master) to the

other (slave).

4-18. Transfer function when two TS-850S transceivers are connected together

Notes

1. Other functions may be slowed down while the data is being transferred.

2. All operation data can not be transferred if the master transceiver is in memory channel mode or the slave

transceiver is in Quick memory channel mode.

4-18-1. Connection

Make up a connection cable with 6-pin DIN plugs, or use a 6-pin DIN cord (1m) to connect the ACC1

connectors of the two TS-850S. For 6-pin DIN plugs (option, part No. E07-0654-05) or 6-pin DIN cord (option,

part No. E30-3047-05), contact your nearest KENWOOD authorized service center or dealer.

i to [sEEI-M

Pin No.

Signal Name

1 GND

Signal ground

2 TXD

Transmit data

RXD

Receive data

CTS

Transmit enable

5 RTS Receive enable

6 NC No connection

(plug viewed

from the front)

(plug viewed

from the front)

If a DSP-100 is connected to one of the transceivers, connect as shown in Figure 1.

User supplied cable

(|^ © © o

Relay cable (6 pins)

supplied with DSP-100

(S)

riu-jryk

® CD ^

^ !^ © © © © ©

IZT

If a DSP-100 is connected to each of the transceivers, connect as shown in Figure 2.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 84 85

No comments

Kenwood TS-850S User Manual Page 53