Kenwood TS-850S User Manual download pdf (Page 14)

r*“ SWR---------► ALC

------

► COMP

(The PROC switch

is ON when

the SSB mode.)

■No in(dicator<-

@ M.IN key

Used to enter data into a memory channel.

SWR : Indicates voltage standing wave ratio

(VSWR).

ALC : Indicates internal ALC voltage, or the ALC

voltage fed back from a linear amplifier

connected to this transceiver.

COMP: Indicates compression level during speech

processor operations. Do not exceed 10 dB

of compression. The PROC switch is ON

when the SSB mode.

(§)8.83 FILTER key

Selects the desired 8.83MHz filter regardless of

mode.

@455 FILTER key

Selects the desired 455kHz filter regardless of

mode.

@ Numeric keypad

Consists of a series of switches which will be used

to set, turn on and/or turn off functions.

When used in conjunction with the ENT key, the

keypad is used to directly enter a frequency.

When used in conjunction with the M.IN key, the

keypad is used to enter data into a memory channel.

PLAY, REC key

Used to record and play voice or CW messages

for transmission. (The optional DRU-2 digital

recording unit is required.)

TUNE key

Sets the transmit power to half the rated power

regardless of the position of the PWR control.

Outputs a zero beat in CW receive mode. This

key is useful when tuning a linear amplifier.

FINE key

Makes one turn of the tuning knob equal 1 kHz (1

Hz step) to facilitate precise tuning. When the key

is pressed again, normal tuning returns.

REV key

The BFO uses USB for normal CW reception.

With this key, reception becomes possible on

LSB. The BFO uses LSB for normal FSK

operation. With this key, reception becomes

possible on USB. By pressing this key, reverse

shift is also used for transmission.

PITCH key

Press to turn the PITCH function ON or OFF.

@ CLR (Clear) key

Used when reentering memory channel data, erasing

a memory channel, clearing scan, or when

specifying the channels that will be skipped during

scan operations.

(50) ENT (Enter) key

Used to directly enter a frequency from the numeric

keypad.

@M^VFO key

Used to transfer

VFO.

a frequency from memory to the

(§)SCAN key

Pressing during VFO operation will initiate program

scan, and pressing during memory operation will

initiate memory scan.

These keys are used to select the desired mode of

operation. When a MODE key is pressed the first

character of that mode will be sounded in Morse

code thru the internal speaker.

LSB/USB key

Press the LSB/USB key to alternate between LSB

and USB mode.

CW/FSK key

Press the CW/FSK key to alternate between CW

(R) and FSK(R) mode.

FM/AM key

Press the FM/AM key to alternate between FM(N)

and AM mode.

(§) TUNING knob (VFO)

Rotate the knob to select the desired frequency.

Fast tuning is possible by rotating the knob rapidly.

The dial drag is adjustable by holding the outside

knob and turning the inside knob clockwise to

increase drag, and counterclockwise to decrease

drag.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 84 85

Comments to this Manuals

No comments

Kenwood TS-850S User Manual Page 14

Comments to this Manuals