Kenwood TS-850S User Manual download pdf (Page 44)

B. Split Memory Channel

C. Programmed Scan Memory Channel

1. Select the receive frequency, the mode and the

filter.

Example:21.200 MHz is selected on VFO A.

2. Press the A = B key.

3. Set the RX VFO to B and select the desired

transmit frequency.

Example:21.210 MHz is selected on VFO B.

1 1 1 1 111 11 1

L 1. L

1 u.

u kHz

USB

4. Set the RX VFO to A and set the TX VFO to B.

Indicate the SPLIT display. When the TX VFO B

key is pressed, the transmit frequency is

displayed momentarily. This momentary display

may be suppressed with the function setting at

power on. (Please refer to Section 4-10-15.)

The highest and lowest frequency are stored in this

memory channel. This channel can be used as a

standard memory channel if the highest and lowest

frequencies are identical.

1. Select the lowest operating frequency and the

mode.

Example:?.030 MHz is selected on VFO A.

n n J n n n

i. U J u. u u

2. Press the A = B key.

3. Select the highest operating frequency.

Example: 7.100MHz is selected on VFO B.

4. Press the RX-A key and Press the M.IN key.

USB

/ J f~t n n n

I. L U U. U U

kHz

5. Press the M.IN key.

M. CH

M. SCR

n -1 III

/ n r n n

LI J 1 1,

1 1

J. LI U

kHz

USB

{When 14.175 MHz is stored in Memory Channel 03.)

6. Select the desired Memory Channel number.

M CH

M SCR

1 LI

•

kHl

(When Memory Channel 10 is empty.)

When the desired memory channel is found and

displayed, press the M.IN key again. The current

frequency, mode and filter will be stored, the

Memory Scroll mode will be canceled. The transceiver

will return to the operating mode and frequency that

was displayed before the M.IN key was pressed ini

tially.

I n J I D n n n n

I u

/. L

U U. U U

kHz

(When 21.200 MHz (RX) and 21.210 MHz (TX) are stored in Memory

Channel 10.)

5. Select the desired Programmed Scan Memory

Channel number (90-99ch).

(When Memory Channel 90 is empty.)

6. When the desired program scan memory channel

is found and displayed, press the M.IN key again.

The current frequency, mode and filter will be

stored, the Memory Scroll mode will be canceled,

and the transceiver will return to the operating

frequency that was displayed before the M.IN key

was pressed initially.

/ / n 3 n n n

I. U J u. u u

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 84 85

Comments to this Manuals

No comments

Kenwood TS-850S User Manual Page 44

Comments to this Manuals