Kenwood TS-850S User Manual download pdf (Page 30)

he desired

ransmit.

MODE key

Press the FM / AM key to

alternate between AM and

FM.

RIT/XIT switch/control

SQL(Squelch) control

RF gain control

This control should be all the

way to the right.

TONE control

Turn the control to increase

or decrease the tone.

SLOPE TUNE control

jjust carrier level

M.CH/VFO CH control

This control is used to

change the frequency in 10

kHz steps during VFO

operations.

This control is also used to

select the desired memory

channel during Memory

Channel Operation.

NB switch/control

NB 1 : For pulse type noise,

such as generated by au

tomotive ignition systems.

NB 2 : Noise blanker 2 is used

for long duration pulse

noise, like the “wood

pecker”.

(TRANSMISSION)

D Connect a microphone to the MIC jack.

Q Turn on the DC power supply and then turn the transceiver’s power switch ON.

Q A frequency is shown in the display.

Q Select AM with the MODE key.

Qj Enter the desired frequency.

Before transmitting check the frequency for activity so that you do not interrupt another QSO.

40 W

Q Press the microphone PTT switch, or set the REC/SEND switch to

SEND.

Adjust the CAR control so that the meter indicates as shown Fig.1.

Speak into the microphone and adjust the MIC gain control so that

the meter indicates as shown Fig.2.

__________________________

Note

If the MIC gain control is advanced too far for clockwise, the

transmit signal will become distorted.

1 3 S 7 9 20 40 600B

IHIIIIIIHIIIQOOOOOOGOQOOOOQO

PWR I I I I

SVR

COMP

SvR oooaaaoooQoooooooooooooo

80 W

-Í - I > 1

PWR 1

--------- ALC

-------------

SWR oooooooooooooooooooooo

Fig. 2

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 84 85

Comments to this Manuals

No comments

Kenwood TS-850S User Manual Page 30

Comments to this Manuals