Kenwood TH-D72E User Manual Page 45
- Page / 75
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
4 Press [ ]/[ ] or rotate the Tuning control to enter
the current year, then press [
OK].
5 Press [ESC ] to exit Menu mode.
Note:
X When used at room temperature (25°C), the error of the internal
clock in a month is within one minute.
X The internal clock is effective until December 31, 2099.
Q Setting Time
1 Access Menu 195.
• The first 2 digits blink.
2 Press [ ]/[ ] or rotate the Tuning control to enter
the current hour, then press [ OK].
• To set 1 o'clock PM for example, select 13.
• The next 2 digits blink.
3 Press [ ]/[ ] or rotate the Tuning control to enter
the current minute, then press [ OK].
4 Press [ESC ] to exit Menu mode.
Q Setting UTC Offset
1 Access Menu 196.
2 Press [ ]/[ ] or rotate the Tuning control to select
the appropriate UTC offset, then press [ OK].
• The selectable range is from +14:00 to –14:00 in
steps of 15 minutes.
3 Press [ESC ] to exit Menu mode.
APRS – 2
CONNECTING TO AN EXTERNAL GPS UNIT OR
WEATHER STATION
The COM terminal on this transceiver accepts a 2.5 mm
(1/10") 3-conductor plug. If necessary, use the cable
(service part: E30-3400-XX) to modify the cable end of
external GPS receiver or Weather Station.
532
GND
RXD
TXD
Shield
(to GND on GPS/
WX)
Red
(to DATA OUT on
GPS/ WX)
White
(to DATA IN on
GPS/ WX)
External GPS receiver
COM terminal
Weather Station
(solder side)
Line filter
• Attach the line filter to the cable.
• Use a GPS receiver which conforms to the NMEA-0183
format and is compatible with RS-232C signal polarity output
at the below mentioned levels.
[Low level: less then +0.5 V / High level: more then +3 V]
You cannot use GPS receivers with USB-type connections.
ADJUSTING THE INTERNAL CLOCK
When the internal GPS function is turned ON, the year,
month, day, and time are automatically set from the GPS
satellite information. If the GPS information cannot be
received, you can manually enter the date and time.
Note: The battery for the clock backup is built into the unit. When
the battery pack is connected, the backup battery begins to charge. It
takes approximately 8 hours to become fully charged.
Q Setting Date
1 Access Menu 194.
• The first 2 digits blink.
2 Press [ ]/[ ] or rotate the Tuning control to enter
the current month (TH-D72A) or day (TH-D72E),
then press [ OK].
• The next 2 digits blink.
3 Press [ ]/[ ] or rotate the Tuning control to enter
the current day (TH-D72A) or month (TH-D72E),
then press [
OK].
• The last 2 digits blink.
- INSTRUCTION MANUAL 1
- CONTENTS 2
- CONTENTS – 2 3
- CONTENTS – 3 4
- CONTENTS – 4 5
- CONTENTS – 5 6
- OPERATING THROUGH REPEATERS 7
- REPEATER – 2 8
- REPEATER – 3 9
- TRANSMITTING A 1750 Hz TONE 9
- REVERSE FUNCTION 9
- TONE FREQUENCY ID 9
- MEMORY CHANNELS 10
- MEMORY CH – 2 11
- RECALLING A MEMORY CHANNEL 11
- RECALLING A CALL CHANNEL 11
- CLEARING A MEMORY CHANNEL 11
- CHANNEL DISPLAY FUNCTION 12
- MEMORY CH – 3 12
- NAMING A MEMORY CHANNEL 12
- MEMORY-TO-VFO TRANSFER 12
- MEMORY CH – 4 13
- SCAN – 1 14
- SCAN – 2 15
- VFO SCAN 15
- MEMORY SCAN 15
- GROUP SCAN 15
- SCAN – 3 16
- SCAN – 4 17
- PROGRAM SCAN 17
- MHz SCAN 17
- CALL SCAN 17
- CTCSS/ DCS/ CROSS TONE 18
- CTCSS/ DCS/ CROSS TONE – 2 19
- CTCSS FREQUENCY SCAN 19
- USING DCS 19
- CROSS TONE 20
- MANUAL DIALING 21
- AUTOMATIC DIALER 21
- DTMF – 1 21
- DTMF – 2 22
- DTMF KEY LOCK 22
- EchoLink 23
- EchoLink – 2 24
- OTHER OPERATIONS 25
- OTHER OP – 2 26
- AUTO POWER OFF (APO) 26
- BATTERY TYPE 26
- KEY LOCK 26
- VOLUME BALANCE (BAND A/B) 26
- OTHER OP – 3 27
- KEY BEEP 27
- PROGRAMMABLE VFO 27
- PROGRAMMABLE FUNCTION KEYS 27
- OTHER OP – 4 28
- FREQUENCY DIRECT ENTRY 28
- SWITCHING FM/AM MODE 28
- BEAT SHIFT 28
- OTHER OP – 5 29
- TX INHIBIT 29
- SELECTING AN OUTPUT POWER 29
- OTHER OP – 6 30
- MASKING BANDS 30
- POWER ON PASSWORD 30
- What is GPS? 31
- GPS and APRS Position Format 31
- INTERNAL GPS FUNCTION ON/OFF 32
- INTERNAL GPS SETUP 32
- GPS DATA SETUP 33
- TRACK LOG 34
- LOG SETUP 35
- TARGET POINT 35
- MARK WAY POINT 36
- PACKET OPERATION 38
- PACKET – 2 39
- TNC COMMANDS LIST 39
- PACKET – 3 40
- PACKET – 4 41
- PACKET – 5 42
- PACKET – 6 43
- APRS – 1 44
- APRS – 2 45
- WEATHER STATION 45
- ADJUSTING THE INTERNAL CLOCK 45
- APRS – 3 46
- RECEIVING APRS DATA 46
- ACCESSING RECEIVED APRS DATA 46
- APRS – 4 47
- DISPLAY EXAMPLE 47
- APRS – 5 48
- SORT FUNCTION 48
- APRS – 6 49
- FILTER FUNCTION 49
- RECEIVING A MESSAGE 49
- APRS – 7 50
- ENTERING A MESSAGE 50
- APRS – 8 51
- TRANSMITTING A MESSAGE 51
- APRS – 9 52
- BASIC SETTINGS 52
- APRS – 10 53
- SETTING INTERNAL TNC 53
- SETTING COM PORT 53
- PROGRAMMING POSITION DATA 54
- APRS – 11 54
- SETTING WAY POINT 54
- PC PORT ON/OFF 54
- APRS – 12 55
- SETTING BEACON INFORMATION 55
- SELECTING A POSITION COMMENT 55
- APRS – 13 56
- STORING STATUS TEXT 56
- QSY FUNCTION 56
- APRS – 14 57
- SETTING PACKET FILTER 57
- APRS – 15 58
- SELECTING YOUR STATION ICON 58
- APRS – 16 59
- SETTING TX BEACON 59
- SETTING ALGORITHM 59
- APRS – 17 60
- SETTING SmartBeaconing 60
- APRS – 18 61
- PROGRAMMING A PACKET PATH 61
- APRS – 19 62
- APRS – 20 63
- VOICE ALERT 63
- WEATHER STATION DATA OUTPUT 63
- APRS – 21 64
- SETTING AS A DIGIPEATER 64
- APRS – 22 65
- STORING USER PHRASES 65
- STORING AUTO MESSAGE REPLY 65
- APRS – 23 66
- SETTING SOUND 66
- APRS – 24 67
- SETTING INTERRUPT DISPLAY 67
- APRS – 25 68
- SELECTING A DISPLAY UNIT 68
- SELECTING A NAVITRA GROUP 68
- STORING NAVITRA MESSAGE 68
- APRS – 26 69
- DX PACKETCLUSTERS MONITOR 69
- TRANSCEIVER RESET 70
- SKY COMMAND SYSTEM II 71
- SKY CMD – 2 72
- PREPARATION FLOW 72
- SKY CMD – 3 73
- PROGRAMMING CALL SIGNS 73
- PROGRAMMING A TONE FREQUENCY 73
- CONTROL OPERATION 73
- WEATHER ALERT (TH-D72A ONLY) 74
- PREPARATION 75
- WIRELESS OP – 1 75
Related products and manuals for GPS receiver Kenwood TH-D72E
GPS receiver Kenwood KCA-BT200 User Manual
(80 pages)
(80 pages)
GPS receiver Kenwood DNX9980HD User Manual
(92 pages)
(92 pages)
GPS receiver Kenwood KNA-G431 User Manual
(120 pages)
(120 pages)
GPS receiver Kenwood DNX710EX User Manual
(100 pages)
(100 pages)
GPS receiver Kenwood DDX8046BT User Manual
(124 pages)
(124 pages)
GPS receiver Kenwood DDX6046BT User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood KNA-G510 User Manual
(160 pages)
(160 pages)
GPS receiver Kenwood DNX7180 User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood DNX7340BT User Manual
(20 pages)
(20 pages)
GPS receiver Kenwood DNX7100 User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood DNX7240BT User Manual
(24 pages)
(24 pages)
GPS receiver Kenwood DNX6160 User Manual
(100 pages)
(100 pages)
GPS receiver Kenwood DNX7360BT User Manual
(12 pages)
(12 pages)
GPS receiver Kenwood DDX8024BT User Manual
(100 pages)
(100 pages)
GPS receiver Kenwood DNX7000EX User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood DNX512EX User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood DDX5036 User Manual
(11 pages)
(11 pages)
© 2020, manymanuals.com. All rights reserved. | 0.280 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals