Kenwood TH-D72E User Manual Page 19
- Page / 75
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
CTCSS/ DCS/ CROSS TONE – 2
CTCSS FREQUENCY SCAN
This function scans through all CTCSS frequencies to
identify the incoming CTCSS frequency on a received
signal. You may find this useful when you cannot recall
the CTCSS frequency that the other persons in your group
are using.
1 Press [TONE] 2 times to activate the CTCSS function.
• The “ ” icon appears on the display when the CTCSS
function is On.
• Each time you press
[TONE], the selection changes as
follows:
Tone (
) ° CTCSS ( ) ° DCS ( ) ° Cross
Tone (
: default) ° Off (no display).
<Additionally, when APRS is ON and Voice Alert is
configured, Voice Alert ON is added to the above cycle.>
2 Press [F], [TONE] (1s).
• Scan starts and “Scanning” blinks on the display.
• To quit the scan, press [ESC ].
• When a CTCSS frequency is identified, the identified
frequency appears on the display and blinks.
3 Press [Ź (OK)] to program the identified frequency in
place of the currently set CTCSS frequency.
• The CTCSS function will remain on. To cancel CTCSS,
press [TONE] until CT no longer appears on the display.
• Press
[ESC
] if you do not want to program the
identified frequency.
DCS
USING DCS
1 Select your desired band.
2 Press [TONE] 3 times to activate the DCS function.
• The “ ” icon appears on the display when the DCS
function is on.
• Each time you press [TONE], the selection changes as
follows:
Tone (
) ° CTCSS ( ) ° DCS ( ) ° Cross
Tone (
: default) ° Off (no display).
<Additionally, when APRS is ON and Voice Alert is
configured, Voice Alert ON is added to the above cycle.>
3 Press [F], [TONE].
• The current DCS code appears on the display and blinks.
4 Press [ ]/[ ] or rotate the Tuning control to select
your desired DCS code.
• Refer to the table below for the available codes.
• To exit the DCS code selection, press
[ESC
].
5 Press [ OK] to complete the setting.
6 When you are called: The transceiver squelch opens
only when the selected DCS code is received.
When you make a call: Press and hold [PTT], then
speak into the microphone.
• To cancel DCS, press [TONE] until DCS no longer
appears on the display.
DCS Code
023 025 026 031 032 036 043 047
051 053 054 065 071 072 073 074
114 115 116 122 125 131 132 134
143 145 152 155 156 162 165 172
174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265
266 271 274 306 311 315 325 331
332 343 346 351 356 364 365 371
411 412 413 423 431 432 445 446
452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606
612 624 627 631 632 654 662 664
703 712 723 731 732 734 743 754
- INSTRUCTION MANUAL 1
- CONTENTS 2
- CONTENTS – 2 3
- CONTENTS – 3 4
- CONTENTS – 4 5
- CONTENTS – 5 6
- OPERATING THROUGH REPEATERS 7
- REPEATER – 2 8
- REPEATER – 3 9
- TRANSMITTING A 1750 Hz TONE 9
- REVERSE FUNCTION 9
- TONE FREQUENCY ID 9
- MEMORY CHANNELS 10
- MEMORY CH – 2 11
- RECALLING A MEMORY CHANNEL 11
- RECALLING A CALL CHANNEL 11
- CLEARING A MEMORY CHANNEL 11
- CHANNEL DISPLAY FUNCTION 12
- MEMORY CH – 3 12
- NAMING A MEMORY CHANNEL 12
- MEMORY-TO-VFO TRANSFER 12
- MEMORY CH – 4 13
- SCAN – 1 14
- SCAN – 2 15
- VFO SCAN 15
- MEMORY SCAN 15
- GROUP SCAN 15
- SCAN – 3 16
- SCAN – 4 17
- PROGRAM SCAN 17
- MHz SCAN 17
- CALL SCAN 17
- CTCSS/ DCS/ CROSS TONE 18
- CTCSS/ DCS/ CROSS TONE – 2 19
- CTCSS FREQUENCY SCAN 19
- USING DCS 19
- CROSS TONE 20
- MANUAL DIALING 21
- AUTOMATIC DIALER 21
- DTMF – 1 21
- DTMF – 2 22
- DTMF KEY LOCK 22
- EchoLink 23
- EchoLink – 2 24
- OTHER OPERATIONS 25
- OTHER OP – 2 26
- AUTO POWER OFF (APO) 26
- BATTERY TYPE 26
- KEY LOCK 26
- VOLUME BALANCE (BAND A/B) 26
- OTHER OP – 3 27
- KEY BEEP 27
- PROGRAMMABLE VFO 27
- PROGRAMMABLE FUNCTION KEYS 27
- OTHER OP – 4 28
- FREQUENCY DIRECT ENTRY 28
- SWITCHING FM/AM MODE 28
- BEAT SHIFT 28
- OTHER OP – 5 29
- TX INHIBIT 29
- SELECTING AN OUTPUT POWER 29
- OTHER OP – 6 30
- MASKING BANDS 30
- POWER ON PASSWORD 30
- What is GPS? 31
- GPS and APRS Position Format 31
- INTERNAL GPS FUNCTION ON/OFF 32
- INTERNAL GPS SETUP 32
- GPS DATA SETUP 33
- TRACK LOG 34
- LOG SETUP 35
- TARGET POINT 35
- MARK WAY POINT 36
- PACKET OPERATION 38
- PACKET – 2 39
- TNC COMMANDS LIST 39
- PACKET – 3 40
- PACKET – 4 41
- PACKET – 5 42
- PACKET – 6 43
- APRS – 1 44
- APRS – 2 45
- WEATHER STATION 45
- ADJUSTING THE INTERNAL CLOCK 45
- APRS – 3 46
- RECEIVING APRS DATA 46
- ACCESSING RECEIVED APRS DATA 46
- APRS – 4 47
- DISPLAY EXAMPLE 47
- APRS – 5 48
- SORT FUNCTION 48
- APRS – 6 49
- FILTER FUNCTION 49
- RECEIVING A MESSAGE 49
- APRS – 7 50
- ENTERING A MESSAGE 50
- APRS – 8 51
- TRANSMITTING A MESSAGE 51
- APRS – 9 52
- BASIC SETTINGS 52
- APRS – 10 53
- SETTING INTERNAL TNC 53
- SETTING COM PORT 53
- PROGRAMMING POSITION DATA 54
- APRS – 11 54
- SETTING WAY POINT 54
- PC PORT ON/OFF 54
- APRS – 12 55
- SETTING BEACON INFORMATION 55
- SELECTING A POSITION COMMENT 55
- APRS – 13 56
- STORING STATUS TEXT 56
- QSY FUNCTION 56
- APRS – 14 57
- SETTING PACKET FILTER 57
- APRS – 15 58
- SELECTING YOUR STATION ICON 58
- APRS – 16 59
- SETTING TX BEACON 59
- SETTING ALGORITHM 59
- APRS – 17 60
- SETTING SmartBeaconing 60
- APRS – 18 61
- PROGRAMMING A PACKET PATH 61
- APRS – 19 62
- APRS – 20 63
- VOICE ALERT 63
- WEATHER STATION DATA OUTPUT 63
- APRS – 21 64
- SETTING AS A DIGIPEATER 64
- APRS – 22 65
- STORING USER PHRASES 65
- STORING AUTO MESSAGE REPLY 65
- APRS – 23 66
- SETTING SOUND 66
- APRS – 24 67
- SETTING INTERRUPT DISPLAY 67
- APRS – 25 68
- SELECTING A DISPLAY UNIT 68
- SELECTING A NAVITRA GROUP 68
- STORING NAVITRA MESSAGE 68
- APRS – 26 69
- DX PACKETCLUSTERS MONITOR 69
- TRANSCEIVER RESET 70
- SKY COMMAND SYSTEM II 71
- SKY CMD – 2 72
- PREPARATION FLOW 72
- SKY CMD – 3 73
- PROGRAMMING CALL SIGNS 73
- PROGRAMMING A TONE FREQUENCY 73
- CONTROL OPERATION 73
- WEATHER ALERT (TH-D72A ONLY) 74
- PREPARATION 75
- WIRELESS OP – 1 75
Related products and manuals for GPS receiver Kenwood TH-D72E
GPS receiver Kenwood KCA-BT200 User Manual
(80 pages)
(80 pages)
GPS receiver Kenwood DNX9980HD User Manual
(92 pages)
(92 pages)
GPS receiver Kenwood KNA-G431 User Manual
(120 pages)
(120 pages)
GPS receiver Kenwood DNX710EX User Manual
(100 pages)
(100 pages)
GPS receiver Kenwood DDX8046BT User Manual
(124 pages)
(124 pages)
GPS receiver Kenwood DDX6046BT User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood KNA-G510 User Manual
(160 pages)
(160 pages)
GPS receiver Kenwood DNX7180 User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood DNX7340BT User Manual
(20 pages)
(20 pages)
GPS receiver Kenwood DNX7100 User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood DNX7240BT User Manual
(24 pages)
(24 pages)
GPS receiver Kenwood DNX6160 User Manual
(100 pages)
(100 pages)
GPS receiver Kenwood DNX7360BT User Manual
(12 pages)
(12 pages)
GPS receiver Kenwood DDX8024BT User Manual
(100 pages)
(100 pages)
GPS receiver Kenwood DNX7000EX User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood DNX512EX User Manual
(32 pages)
(32 pages)
GPS receiver Kenwood DDX5036 User Manual
(11 pages)
(11 pages)
© 2020, manymanuals.com. All rights reserved. | 0.749 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals