Kenwood TS-480SAT User Manual download pdf (Page 72)

13 OPERATOR CONVENIENCES

MICROPHONE PF KEYS

When using the optional MC-47 microphone with the

MJ-88 plug adaptor, you can customize the functions

of the Microphone PF1 (CALL), PF2 (VFO), PF3

(MR), and PF4 (PF) keys. You can assign the

following types of functions to these keys via Menu

Nos. 49 ~ 52:

• Directly select a Menu No. without pressing

[MENU/ F.LOCK] and turning the MULTI control.

• Activate the same function as one of the Remote

Control panel keys.

One of the following functions can be assigned to

each PF key. Selecting “99” assigns no function to

the PF key.

PF KEY

You can program the Remote Control panel [PF] key

to assign a function that you frequently use. The

default is VOICE1 for the optional Voice Guide and

Storage unit, VGS-1 {page 68}. You can assign one

of the functions in “MICROPHONE PF KEYS” {above}

to this PF key, accessing Menu No. 48.

rebmuN noitcnuF rebmuN noitcnuF

06~0

06~00.oNuneM

08NI.M

161ECIOV18T.WC

262ECIOV281HC

36rotinoMXR382HC

XRPSD

rotinoM

483HC

56kcoL.qerF58ENIF

66)XT(dneS68RLC

76enutXT78RTM

86BSUBSL88zHM

96WCKSF982/1TNA

07MFMA09BN

17TES-FT19RN

27RMQ29CB

37IMQ39LND

47TILPS49–

57B/A59–

67V/M69–

77B=A79–

87NACS89–

97M

OFV99noitcnufoN

RX DSP EQUALIZER

EQUALIZING RECEIVING AUDIO

Use Menu No. 18 to change the receiver frequency

responses of the target signal. You can select one

from 8 different receiver profiles including the default

flat response. Selecting any of the following items

from the Menu causes “R

EQ” to appear on the

display.

•Off (oFF):

The flat frequency response (default).

• High boost 1 (hb1):

Emphasizes higher audio frequencies.

• High boost 2 (hb2):

Emphasizes higher audio frequencies but lower

audio frequency attenuation is less than High

boost1 (hb1).

• Formant pass (FP):

Improves clarity by suppressing audio frequencies

outside the normal voice frequency range.

• Bass boost 1 (bb1):

Emphasizes lower audio frequencies.

• Bass boost 2 (bb2):

Emphasizes lower audio frequencies but higher

audio frequency attenuation is less than Bass

boost1 (bb1).

• Conventional (c):

Attenuates 2 kHz or more audio frequency slightly.

• User (U):

Reserved for the ARCP software. Off (flat) is

programmed at the factory as a default.

RX MONITOR

RX monitor disables the squelch function temporarily

to monitor the current frequency activities.

To use the RX Monitor function, first assign the

function to the PF key on the Remote Control panel

(or Mic PF keys).

1 Press [MENU/ F.LOCK] and turn the MULTI

control to select Menu No. 48.

2 Press [ ]/ [ ] to select “63”.

3 Press [MENU/ F.LOCK] to store the setting and

exit the Menu mode.

4 Press [PF].

• While [PF] is pressed, the speaker unmutes.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 103 104

Comments to this Manuals

No comments

Kenwood TS-480SAT User Manual Page 72

Comments to this Manuals

Related products and manuals for Boating Accessories Kenwood TS-480SAT