Kenwood TK-2300 User Manual download pdf (Page 23)

CHANNEL OPERATING FREQUENCIES

To change the operating frequency of a channel:

1 With the transceiver power OFF, press and hold the PTT

switch and Side 1 key while turning the transceiver power

ON.

• Continue to hold the PTT switch and Side 1 key until the LED

lights orange and the transceiver announces “Self”.

2 Release the PTT switch and Side 1 key.

• The transceiver announces “Channel”.

• Pressing the

Side 1 key or Side 2 key will toggle between QT,

DQT, and Channel setup.

3 Press and release the PTT switch, then rotate the Channel

selector to your desired channel.

• Upon pressing and releasing the PTT switch, a beep will sound

and the transceiver announces “Table zero”.

4 Press the Side 1 or Side 2 key to increment/ decrement the

Table number, to select the new channel frequency.

• Press and hold the Side 1 or Side 2 key to increment/

decrement the number by 5 at a time.

• Table numbers and their corresponding operating frequencies

are provided in the table on page 14.

• A voice announcement will inform you of the currently selected

Table number.

5 Press the PTT switch to save the setting.

• A beep will sound.

• Repeat steps 3 to 5 to set up another channel.

6 Turn the transceiver power OFF and then ON again to

activate the new settings.

Note: The transceiver will automatically return to normal operation

if no action is performed for 5 seconds.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

No comments

Kenwood TK-2300 User Manual Page 23