Kenwood TK-2300 User Manual download pdf (Page 13)

INSTALLING THE ANTENNA

Antenna

Screw the antenna into the connector

on the top of the transceiver by

holding the antenna at its base and

turning it clockwise until secure.

Note: The antenna is neither a handle,

a key ring retainer, nor a speaker/

microphone attachment point. Using

the antenna in these ways may

damage the antenna and degrade your

transceiver’s performance.

INSTALLING THE BELT CLIP

Belt clip

If necessary, attach the belt clip using

the two supplied M3 x 8 mm screws.

Note: If the belt clip is not installed, its

mounting location may get hot during

continuous transmission or when left

sitting in a hot environment.

Do not use glue which is designed to prevent screw loosening when

installing the belt clip, as it may cause damage to the transceiver.

Acrylic ester, which is contained in these glues, may crack the

transceiver’s back panel.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

No comments

Kenwood TK-2300 User Manual Page 13