Kenwood TK-2300 User Manual download pdf (Page 19)

VOICE OPERATED TRANSMISSION (VOX)

VOX operation allows you to transmit hands-free. VOX can

only be used if you are using a supported headset. This

function can be turned off for specific channels.

To activate VOX and set the VOX Gain level, perform the

following steps:

1 Connect the headset to the transceiver .

• The VOX function does not activate when a headset is not

connected to the accessory terminal of the transceiver.

2 With the transceiver power OFF, press and hold the Side 1

key while turning the transceiver power ON.

3 Continue to hold the Side 1 key until a beep sounds.

• The LED indicator lights turn orange.

• When the Side 1 key is released, the transceiver will

announces the VOX Gain level (the default level is OFF, so, a

double beep sounds).

4 Press the Side 1 key to select the VOX Gain level of the radio

(from 1~10 or Off).

• Press the Side 2 key to turn VOX ON/OFF for the current

channel (you can change this setting for each channel by

selecting a channel with the Channel selector). When turned

ON, a beep sounds. When turned OFF, a double beep sounds.

5 Press the PTT switch to save the setting.

• A beep will sound.

• The transceiver announces the new VOX Gain level.

6 Turn the transceiver power OFF and then ON again to

activate VOX.

Note:

◆ The transceiver will automatically return to normal operation if

no action is performed for 5 seconds.

◆ VOX Gain level 1 is the least sensitive and VOX Gain level 10 is

the most sensitive.

◆ If a headset is connected to the transceiver while the VOX

function is switched ON and the VOX Gain level is configured

to a higher, more sensitive level, louder received signals may

cause the transceiver to start transmission.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Kenwood TK-2300 User Manual Page 19