Kenwood TK-2300 User Manual download pdf (Page 18)

BASIC OPERATIONS

1 Turn the Power switch/ Volume control

clockwise to switch the transceiver power

ON.

• A beep sounds.

2 Rotate the Channel selector to select your

desired channel.

• When you receive an appropriate signal, you

will hear audio from the speaker. Adjust the

volume as necessary.

3 To make a call, press and hold the PTT

switch, then speak into the microphone using

your normal speaking voice.

• Hold the microphone approximately 1.5 inches

(3 to 4 cm) from your lips.

4 Release the PTT switch to receive.

Note: When the battery pack voltage becomes too

low, the Low Battery Warning sounds an alert tone

every 30 seconds and the LED indicator blinks red.

LED Indicator Status

Indicator Color Meaning

Lights red Transmitting

Lights green Receiving a call

Blinks red Battery power is low while transmitting

Blinks green Scanning

Blinks red/orange

The selected channel has not been

programmed and cannot be used.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

No comments

Kenwood TK-2300 User Manual Page 18