Kenwood P25 User Manual download pdf (Page 36)

• Playback

Press this key to enter Playback mode. While in Playback mode, select the

desired memory channel to play back. Refer to “PLAYBACK” on page 36 for

details. Press and hold this key for 1 second to start recording a voice memo.

Refer to “VOICE MEMOS” on page 35 for details.

• Public Address

Press this key to toggle the Public Address function ON and OFF. “PUBLIC

ADRS” appears on the display when Public Address is activated. To use the

Public Address system, your dealer must first install an external speaker.

This function causes all audio input via the microphone to be amplified and

output from the external speaker. Adjust the volume level as necessary when

using the Public Address system

• Scan

Press this key to scan your transceiver channels for a signal. While scanning,

the (KCH-14) or

SCAN

(KCH-15) icon appears on the display. Press this

key again to quit scan. Refer to “SCAN” on page 14 for details.

• Scan Delete

Press this key during scan operation to temporarily delete a channel from the

scanning sequence. The channel settings are returned to normal when scan

is ended. Refer to “TEMPORARY CHANNEL LOCKOUT” on page 14 for details.

• Scan Program

Press this key to access the scan list. You can set each transceiver channel

to be added to or removed from your scan list. Refer to “SCAN PROGRAMMING”

on page 16 for details.

• Scrambler/ Encryption

Press this key to activate or deactivate the Scrambler/ Encryption function.

When activated, the transceiver encrypts your voice so that anybody listening

to your conversation will not be able to understand what you are saying.

Press and hold this key for 1 second to enter Scrambler Code/ Encryption

Key Selection mode. Refer to “SCRAMBLER (FM)/ ENCRYPTION (APCO)”

on page 23 for details.

• Scrambler/ Encryption Code

Press this key to enter Scrambler Code/ Encryption Key Selection mode.

After entering Scrambler Code/ Encryption Key Selection mode, press the

GRP and keys or rotate the CH control to change your Scrambler

code/ Encryption key from 1 to 16. Refer to “SCRAMBLER (FM)/

ENCRYPTION (APCO)” on page 23 for details.

• Selcall

Press this key to enter Selcall mode. Press and hold this key to enter Stack

mode. Refer to “FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION”

on page 17 for details.

• Selcall + Status

Press this key to enter Selcall mode. Press this key again to enter Status

mode. Press and hold this key to enter Stack mode. Refer to “FleetSync:

ALPHANUMERIC 2-WAY PAGING FUNCTION” on page 17 for details.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41

Comments to this Manuals

No comments

Kenwood P25 User Manual Page 36

Comments to this Manuals

Related products and manuals for Two-way radios Kenwood P25