Kenwood P25 User Manual download pdf (Page 26)

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

Note: DTMF calls can be made only in Conventional FM Operation.

MAKING A DTMF CALL

■ MANUAL DIALING

Note: To make a DTMF call using manual dialing, you must use an optional microphone with a

DTMF keypad.

1 Press and hold the microphone PTT switch.

2 Enter the desired digits using the DTMF keypad.

• If you release the PTT switch, transmit mode will end even if the complete

number has not been sent.

■ STORE & SEND

1 Enter the desired digits using the DTMF keypad.

• The digits appear on the display as you enter them.

•You can enter up to 31 digits before transmitting.

2 After entering the complete number, press the microphone PTT switch to

transmit.

Note: If you switch the power OFF before transmitting the number, the number will be cleared.

■ KEYPAD AUTO PTT

If your dealer has activated the Keypad Auto PTT function, simply press the

keys on the keypad to make the call.

• The DTMF code will be sent automatically when you press a key.

AUTODIAL

Autodial allows you to quickly call DTMF numbers that have been programmed

onto your transceiver.

1 Press the key programmed as Autodial.

• “CODE?” or the first entry in the Autodial list appears on the display.

2 Press the GRP and keys, rotate the CH control, or enter the

appropriate DTMF number (01 ~ 32) to select your desired Autodial list number.

3 Press the microphone PTT switch or the PF 4 key to make the call.

STUN CODE

This function is used when a transceiver is stolen or lost. When the transceiver

receives a call containing a stun code, either transmit mode will be disabled, or

both receive mode and transmit mode will be disabled. The stun code is

cancelled when the transceiver receives a call with a revive code.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

No comments

Kenwood P25 User Manual Page 26