Kenwood P25 User Manual download pdf (Page 24)

■ TRANSMITTING

1 Select your desired zone and channel.

2 Press the key programmed as Status to enter Status mode or

Selcall + Status to enter Selcall mode.

• When using the Status key to enter Status mode, the target Fleet/ ID is fixed

and cannot be selected. Skip to step 5 to continue.

3 In Selcall mode, press the GRP and keys or rotate the CH control

to select the ID of the station you want to call.

• Alternatively, you can enter a station ID using a DTMF keypad.

4 Press the PF 2 key (the second key from the left, after the CH control), to

enter Status mode.

5 Press the GRP and keys or rotate the CH control to select the

status ID you want to transmit.

• Alternatively, you can enter a station ID using a DTMF keypad.

6 Press the microphone PTT switch or the PF 4 key to initiate the Status

call.

• “<COMPLETE>” is displayed when the call has been successfully transmitted.

■ RECEIVING

The (KCH-14) or (KCH-15) icon will flash and a calling

ID or text message will appear when a Status call is received.

Press any key to return to normal operation.

■ REVIEWING MESSAGES IN THE STACK MEMORY

1 Press and hold the key programmed as Selcall, Status, or

Selcall + Status for 1 second to enter Stack mode.

• The last received message is displayed with the message number.

2 Press the GRP and keys or rotate the CH control to select the

desired message.

3 Press the PF 1 key to return to normal operation.

•To delete the selected message, press the PF 3 or DTMF # key. To confirm the

deletion, press the PF 2 or DTMF

key.

•To delete all messages, press and hold the PF 3 or DTMF # key for 1 second.

To confirm the deletion, press the PF 2 or DTMF

key.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

No comments

Kenwood P25 User Manual Page 24