Kenwood KRF-V5200D User Manual download pdf (Page 2)

English

Before applying power

Caution : Read this page carefully to ensure safe

operation.

Units are designed for operation as follows.

Australia ......................................................................................AC 240 V only

Europe .........................................................................................AC 230 V only

Information on Disposal of Old Electrical

and Electronic Equipment (applicable for EU

countries that have adopted separate waste

collection systems)

Products with the symbol (crossed-out

wheeled bin) cannot be disposed as

household waste.

Old electrical and electronic equipment

should be recycled at a facility capable of handling

these items and their waste by products.

Contact your local authority for details in locating a

recycle facility nearest to you.

Proper recycling and waste disposal will help conserve

resources whilst preventing detrimental effects on our

health and the environment.

Unpacking

Unpack the unit carefully and make sure that all the accessories

are present.

FM indoor antenna (1) AM loop antenna (1)

Remote control unit (1) Batteries (R03) (2)

RC-R0517

If any accessories are missing, or if the unit is damaged or fails to

operate, notify your dealer immediately. If the unit was shipped

to you directly, notify your shipper immediately. Kenwood

recommends that you retain the original carton and packing

materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

Notes on instructions

The operating instructions given in this manual assume that the

user mainly operates the receiver using the remote control unit.

When the same operation is also available on the main unit, the

operating method is indicated in illustrations.

The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT

SELECTOR] knobs on the main unit are operated by turning the

knobs clockwise or counterclockwise.

Example:

Getting into the setup mode

The setup procedure is identical for all of the setting elements.

Once you remember the following procedure, you can easily set

up other setting elements.

MULTI CONTROL

SETUP

MULTI CONTROL

/O

œ Press [SETUP] to enter the setup mode.

∑ Use [MULTI CONTROL 5/∞] to select the element to

setup.

Display Selection

"SP SETUP" Speaker setup

"TEST TONE" Test tone

"DISTANCE" Distance

"LFE LVL" Low frequency effects level

"EXIT" Exit the setup mode.

é Press [SETUP] to get into the setup mode of the

selected element.

Safety precautions

WARNING :

TO PREVENT FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,

WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO

ALERT THE USER TO THE PRESENCE OF UNINSULATED

"DANGEROUS VOLTAGE" WITHIN THE PRODUCT’

S ENCLOSURE THAT MAY BE OF SUFFICIENT

MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC

SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL

TRIANGLE IS INTENDED TO ALERT THE USER TO

THE PRESENCE OF IMPORTANT OPERATING AND

MAINTENANCE (SERVICING) INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE APPLIANCE.

The knob on the main unit

is pointed with an arrow to

indicate that it can be turned in

either direction.

The operating

procedures refer to

those of the remote

control unit. Some

operations are also

available using the key

(or knob) of the same

name on the main unit.

Options to be

selected are listed

in a table.

B60-5676-00_00.indd 2B60-5676-00_00.indd 2 07.4.12 9:56:56 AM07.4.12 9:56:56 AM

1 2 3 4 5 6 7 ... 39 40

Comments to this Manuals

No comments

Kenwood KRF-V5200D User Manual Page 2

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood KRF-V5200D