Kenwood KRF-V5060D User Manual download pdf (Page 30)

2 Use the MULTI CONTROL knob or keys to select the ON or OFF

setting.

• The adjustment item is displayed for approximately 8 seconds.

• Some Dolby Digital software may not be compatible with the

Midnight mode.

Panorama mode (Pro Logic

Music mode only)

When listening to music, you will be able to enjoy the “wraparound”

sound effect when you adjust the panorama mode.

1 Press the SOUND key repeatedly until “PANORAMA” appears on

the display.

• The PANORAMA setting indication scrolls across the display.

“PANORAMA” will be scrolled from right to left.

2 Use the MULTI CONTROL knob or keys to select PANORAMA ON

or OFF.

1 ON : PANORAMA mode is ON.

2 OFF : PANORAMA mode is OFF.

Dimension mode (Pro Logic

Music mode only)

When listening to music with certain recordings, you will also be able to

achieve a suitable balance from all the speakers by adjusting the

dimension mode.

1 Press the SOUND key repeatedly until “DIMENSION” appears on

the display.

• The DIMENSION indication scrolls across the display.

2 Use the MULTI CONTROL knob or keys to adjust the soundfield

towards the rear or the front.

Soundfield is adjusted towards the front.

Soundfield is in neutral position.

Soundfield is adjusted towards the rear.

Center Width mode (Pro Logic

Music mode only)

Center width adjustment allows you to enjoy an enchanced sound when

listening to music through center image from only center speaker, or left

and right speakers or various combinations adjustments.

1 Press the SOUND key repeatedly until “CENTER WIDTH” ap-

pears on the display.

• The CENTER WIDTH indication scrolls across the display.

• When the center speaker is switched OFF, this mode will not

be effective.

2 Use the MULTI CONTROL knob or keys to adjust the left-center-

right output.

Center image will be heard from center speaker only.

Center image will be heard from left and right speakers only.

• When in other positions, center image from center speaker, left and

right speakers can be heard simultaneously with various combina-

tions.

Subwoofer adjustment

It is easy to adjust the volume of the subwoofer using the remote

control.

1 Press the SOUND key repeatedly until “SW” appears on the

display.

2 Use MULTI CONTROL knob or keys to adjust the volume.

• The adjustment range is –10 dB to +10 dB.

Display dimmer adjustment

The dimmer function lets you select the brightness of the receiver's

display. You might find this useful if you darken your room to watch

movies or listen to music.

Each time you press the DIMMER key, the display brightness

changes among the three available settings. Select the bright-

ness level you find most pleasing.

96kHz LPCM playback

The receiver is compatible with the 96kHz LPCM playback. To play a

96kHz DVD, set the listen mode to “STEREO”.

• In F-AUTO input mode, the listen mode will automatically be STEREO.

• When in D-MANUAL input mode (listen mode is not STEREO), “FS

96kHz” will appear in the display and no sound can be heard from the

speakers.

Press the LISTEN MODE key (the listen mode changes to the STEREO

mode) to output sound from the speakers.

Ambience effects

*5197/26-30/EN 26/03/2002, 2:56 PM30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Kenwood KRF-V5060D User Manual Page 30

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood KRF-V5060D