Kenwood KRF-V5060D User Manual download pdf (Page 20)

Normal playback

Adjusting the sound

Adjusting the TONE (remote control only)

You can adjust the sound quality when the receiver is in the PCM stereo

and analog stereo mode.

1 Press the TONE key to select the TONE mode.

2 Use the MULTI CONTROL knob or keys to select TONE ON/OFF.

3 Press the TONE key for the following displays.

1 TONE : Tone setting mode is ON.

2 BASS : Select this to adjust the low frequency range.

3 TREB : Select this to adjust the high frequency range.

4 Use the MULTI CONTROL knob or keys to adjust the sound

quality.

• The bass and treble levels are adjustable from -10 to +10 in 2 step

increments.

• The adjustment item is displayed for approximately 8 seconds.

• If CINEMA EQ is turned ON, TONE function will not be available.

Once-touch low frequency emphasis (BASS BOOST)

(remote control only)

You can adjust the sound quality when the receiver is in the PCM stereo

and analog stereo modes.

Press the BASS BOOST key.

• Press the key once to select the maximum (+10) low frequency

emphasis setting.

• TONE will automatically be turned ON.

• This key does not function when the receiver is in the sound quality

or ambience effects adjustment mode.

Switching back the previous setting

Press the BASS BOOST key again.

Adjusting the LOUDNESS mode (remote control only)

You can adjust the Loudness function which controls the low volume

settings to maintain the music’s richness. The adjustment can be made

when the receiver is in the PCM stereo and analog stereo mode.

Press the LOUDNESS key to turn the LOUDNESS setting ON.

To cancel

Press the LOUDNESS key again so that the “LOUDNESS” indica-

tor goes off.

Muting the sound

The MUTE key lets you mute the sound of the speakers.

Press the MUTE key.

To cancel

Press the MUTE key again so that the “MUTE” indicator goes off.

• MUTE ON can also be deactivated by turning the volume control

knob.

CINEMA EQ mode

You can enjoy a more impressive sound effect when you switch

CINEMA EQ ON during Dolby Digital and DTS playback.

Press the CINEMA EQ key.

“CINEMA EQ” will scroll across the display.

• When CINEMA EQ is turned ON, subwoofer remix’s function will

also be effective.

• If REC MODE is ON or TREBLE’s level is -6 or below, CINEMA EQ

function will not be available.

To cancel

Press the CINEMA EQ key again so that the “CINEMA EQ”

indicator goes off and displays “OFF”.

• When CINEMA EQ is turned OFF, the setting will remain until the

next selection is made.

Listening with headphones

1 Press the SPEAKERS ON/OFF key so that the speaker indicator

goes off.

• If you turn off all of the speakers when in surround mode, the

surround mode will be canceled as well, resulting in stereo play-

back.

2 Connect headphones to the PHONES jack.

PHONES

3 Use the VOLUME CONTROL knob or VOLUME keys to adjust the

volume.

Make sure the SP indicator is turned OFF.

VOLUME

MUTE

BASS BOOST

MULTI

CONTROL

CINEMA EQ

VOLUME CONTROL

PHONES

MULTI CONTROL

TONE

CINEMA EQ

LOUDNESS

SPEAKERS ON/OFF

MUTE

*5197/17-21/EN 26/03/2002, 2:52 PM20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments

Kenwood KRF-V5060D User Manual Page 20

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood KRF-V5060D