Kenwood KDC-X898 User Manual download pdf (Page 14)

14

|

Quick Start Guide

Installing/Removing the unit

Non-Japanese cars

Bend the tabs of the mounting sleeve

with a screwdriver or the like and

attach it in place.

<

• Make sure that the unit is installed

securely in place. If the unit is unstable, it

may malfunction (for example, the sound

may skip).

Japanese cars

 Remove the trim plate with reference to

<Removing the trim plate>.

 Align the holes in the unit (two locations

on each side) with the vehicle mounting

bracket and secure the unit with the

screws (M5 x 8 mm MAX.; commercially

available).

8 mm

MAX.

M5mm

M5mm

8mm

MAX.

!

• Use only the specified screws. Using

wrong screws might damage the unit.

Removing the trim plate

 Engage the catch pins on the extraction

key (Accessory2) and release the two

locks on the upper part of frame.

Lift up and pull the frame forward as

shown in the figure.

Catch

Lock

Accessory

2



When the upper part of frame is

removed, remove the lower part of frame.

<

• The frame can be removed from the

bottom side in the same manner.

Removing the unit

 Remove the trim plate with reference to

<Removing the trim plate>.

 Remove the faceplate.

 Insert the two extraction keys

(Accessory2) deeply into the slots on

both sides as shown.

 Lower the extraction key toward the

bottom, and then pull out the unit

halfway while pressing the extraction key

towards the inside.

Accessory2

!

• Be careful to avoid injury from the catch

pins on the extraction key.

 Pull the unit all the way out with your

hands, being careful not to drop it.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Comments to this Manuals

No comments