Kenwood TM-271 User Manual download pdf (Page 22)

MHZ MODE

If the desired operating frequency is far away from the

current frequency, it is quicker to use the MHz Tuning

Mode.

To adjust the MHz digit:

1 While in VFO or Call Mode, press [MENU].

• The MHz digit blinks.

2 Turn the Tuning control to select the desired MHz

value.

3 Press any key to set the selected frequency and

return to normal VFO Mode.

4 Continue adjusting the frequency as necessary, using

the Tuning control or Mic [UP]/[DWN].

DIRECT FREQUENCY ENTRY

In addition to turning the Tuning control or pressing Mic

[UP]/[DWN], there is another way to select the

frequency. When the desired frequency is far away from

the current frequency, you can directly enter a frequency

using the Mic keypad (keypad models only).

1 Press [VFO].

•You must be in VFO mode to make a direct frequency

entry.

2 Press the Mic PF key assigned the ENTER function

{page 59}.

3 Press the numeric keys ([0] to [9]) to enter your

desired frequency.

• Pressing Mic Enter fills all remaining digits (the digits

you did not enter) with 0 and completes the entry. For

example, to select 145.000 MHz, press [1], [4], [5] and

press Mic Enter to complete the entry.

• If you want to revise the MHz digits only, leaving the kHz

digits as they are, press Mic [VFO] in place of Mic

Enter.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

No comments

Kenwood TM-271 User Manual Page 22