Kenwood FPM800 Troubleshooting Guide download pdf (Page 7)

hints

●

When making mayonnaise, put all the ingredients, except the oil,

into the blender. Remove the filler cap. Then, with the appliance

running, add the oil slowly through the hole in the lid.

●

Thick mixtures, e.g. pâtés and dips, may need scraping down. If

the mixture is difficult to process, add more liquid.

●

Ice crushing - operate the pulse in short bursts until crushed to the

desired consistency.

●

The processing of spices is not recommended as they may

damage the plastic parts.

●

The appliance will not work if the blender is incorrectly fitted.

●

To blend dry ingredients - cut into pieces, remove the filler cap,

then with the appliance running, drop the pieces down one by

one. Keep your hand over the opening. For best results empty

regularly.

●

Don’t use the blender as a storage container. Keep it empty

before and after use.

●

Never blend more than 1.6 litres (2 pts 8 fl oz) - less for frothy

liquids like milkshakes.

IMPORTANT: HOT

BLENDING

INSTRUCTIONS

To minimise the possibility of scalding when blending hot

ingredients keep hands and other exposed skin away from the

id to prevent possible burns. The following precautions must be

observed:

●

CAUTION: Blending very hot ingredients may

esult in hot liquid and steam being forced

uddenly past the lid or filler cap

●

We recommend that hot ingredients are allowed to

ool before blending.

●

EVER exceed 1200mls/5 cups capacity if processing hot

iquids, such as soups (refer to the markings on the goblet).

●

ALWAYS commence blending at a low speed and gradually

increase the speed. NEVER blend hot liquids by using the

Pulse setting.

●

Liquids which tend to foam such as milk, should be limited to

a maximum capacity of 1000mls/4 cups.

●

Take care when handling the blender as the goblet and its

contents will be very hot.

●

Take particular care when removing the lid. The lid is

designed to be a tight fit to prevent leakage. If necessary

protect your hands with a cloth or oven gloves when

handling.

●

Ensure the goblet is securely attached to the base and when

removing from the appliance, guide the base and ensure it is

removed together with the goblet.

●

Ensure that the lid and filler cap are securely in place before

every blending operation.

●

Always ensure that the vents in the filler cap are clear before

every blending operation

●

When fitting the lid to the goblet always ensure that the lid

and goblet rim are clean and dry to ensure a good seal and

prevent spillage.

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Comments to this Manuals

No comments

Kenwood FPM800 Troubleshooting Guide Page 7

Comments to this Manuals

Related products and manuals for Food processors Kenwood FPM800