Kenwood th-k20a User Manual download pdf (Page 50)

DTMF TX HOLD

This function causes the transceiver to remain in transmit mode for 2 seconds

after you release each key. Therefore, you can release [PTT] while sending

DTMF tones through manual dialing.

1 Enter Menu mode and access Menu No. 30 (DT.HOLD), then press [F].

2 Rotate the ENC control to select “ON”, then press [F] to store the setting.

3 Press [MENU] or [PTT] to exit Menu mode.

ADJUSTING THE PAUSE DURATION

You can change the pause duration (a space digit) stored in memory channels.

The default setting is 500 milliseconds.

1 Enter Menu mode and access Menu No. 31 (DT.PAUS), then press [F].

2 Rotate the ENC control to select 100/ 250/ 500/ 750/ 1000/ 1500/ 2000 ms,

then press [F] to store the setting.

3 Press [MENU] or [PTT] to exit Menu mode.

DTMF LOCK

If you have a transceiver with the optional speaker microphone installed and are

carrying it in the holder or bag, you sometimes may want to disable the keypad

to avoid accidental transmitting DTMF codes. In this case, turn the DTMF Lock

function ON.

1 Enter Menu mode and access Menu No. 32 (DT.LOCK), then press [F].

2 Rotate the ENC control to select “ON”, then press [F] to store the setting.

3 Press [MENU] or [PTT] to exit Menu mode.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

No comments

Kenwood th-k20a User Manual Page 50