Kenwood th-k20a User Manual download pdf (Page 28)

STORING ODD-SPLIT REPEATER FREQUENCIES

Some repeaters use a receive/transmit frequency pair with a non-standard offset.

If you store two separate frequencies in a memory channel, you can operate on

those repeaters without programming the offset frequency and direction.

1 Store the desired receiving frequency and related data by following the

procedure given for simplex or standard repeater frequencies.

2 Press [VFO], then rotate the ENC control to select the desired transmit

frequency.

• You can also directly enter a desired frequency using the keypad.

3 Press [F] - [MR], then rotate the ENC control to select the memory channel

you programmed in step 1.

4 Press [PTT] + [MR].

• The transmit frequency is stored in the memory channel.

Note: When you recall an odd-split memory channel, “ ” and “ ” appear on the display.

To confirm the transmit frequency, press [REV] (Reverse function).

RECALLING A MEMORY CHANNEL

USING THE ENC CONTROL

1 Press [MR] to enter Memory Recall Mode. The memory channel last used is

recalled.

2 Rotate the ENC control to select your desired memory channel.

• You cannot recall an empty memory channel.

• To restore VFO Mode, press [VFO].

USING A NUMERIC KEYPAD

You can also recall a memory channel by entering a desired memory channel

number with the keypad.

1 Press [MR] to enter Memory Recall Mode.

2 Press [ENT], then enter the channel number.

• For example, to recall channel 149, press [ENT], [MENU] (1), [SQL] (4), [PF] (9).

• You can also enter a memory channel number that is less than 10 by pressing

[ENT] after entering the channel number. For example, to recall memory channel

9, press [ENT], [PF] (9), [ENT]. You can also press [ENT], [STEP] (0), [PF] (9).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

No comments

Kenwood th-k20a User Manual Page 28