Kenwood th-k20a User Manual download pdf (Page 32)

MEMORY CHANNEL TRANSFER

MEMORY TO VFO TRANSFER

After retrieving frequencies and associated data from Memory Recall mode, you

can copy the data to the VFO. This function is useful, for example, when the

frequency you want to monitor is near the frequency stored in a memory channel.

1 Press [MR], then turn the ENC control to recall a desired memory channel.

2 Press [F] - [VFO] to copy the memory channel data to the VFO.

Note:

◆ When transferring an odd-split channel, the Reverse status, Offset direction, and

Transmit frequency are not transferred.

◆ You can also transfer the Program Scan memory channels (L0/U0 ~ L2/U2) and Priority

channel (Pr) to the VFO.

◆ When selecting the Call channel, rotating the ENC control will transfer the data to the

VFO.

CHANNEL TO CHANNEL TRANSFER

You can also copy channel information from one memory channel to another.

This function is useful when storing frequencies and associated data that you

temporarily change in Memory Recall mode.

1 Press [MR], then turn the ENC control to recall a desired memory channel.

2 Press [F] - [MR].

3 Select the memory channel where you would like the data copied, using the

ENC control.

4 Press [MR] to copy the memory channel data to the new channel.

Note: When transferring to the Program Scan memory channels (L0/U0 ~ L9/U9) and the

Priority channel (Pr), the Memory Channel Lockout information is not copied.

CHANNEL DISPLAY MODE

While in this mode, the transceiver displays only memory channel numbers (or

Memory names if they have been stored) instead of frequencies.

Press [PTT] + [MR] + Power ON.

• The transceiver displays the memory channel number in place of the operating

frequency.

To recover normal operation, turn the transceiver OFF and press [PTT] + [MR] +

Power ON again.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

No comments

Kenwood th-k20a User Manual Page 32