Kenwood KRF-V8030D User Manual download pdf (Page 9)

Preparations

OPTICAL

DVD

CD/DVD VIDEO 3 MONITOR

VIDEO 2

COAXIAL

OPTICAL

DIGITAL IN

DIGITAL OUT

OPTICAL

The digital in jacks can accept DTS, Dolby Digital (AC-3), or PCM signals.

Connect components capable of outputting DTS, Dolby Digital (AC-3), or

standard PCM (CD) format digital signals.

If you have connected any digital components to the receiver, be sure to

read the “Input mode settings” section on this page carefully.

Digital connections

To connect an LD player with a DIGITAL RF OUT, connect the LD

player to the KENWOOD RF digital demodulator (DEM-9991D).

Next, connect the DIGITAL OUT jacks of the demodulator to the

DIGITAL IN jacks of the receiver.

Connect the video signal and analog audio signals to the VIDEO

2 or VIDEO 3 jacks. (See "Connecting video components".)

Input mode settings

CD, DVD, VIDEO2, and VIDEO3 inputs each include jacks for digital

audio input and analog audio input.

You must select beforehand which type of input is to be used for each

connected component.

The initial factory setting is to use the digital audio signal for

playback (CD, DVD, VIDEO2, VIDEO3).

To use the analog audio input for playback instead (if, for example, you

have connected a VCR to the VIDEO2 or VIDEO3 input), you must set

the input mode for the corresponding input to the analog mode.

After completing connections and turning on the receiver, follow the

steps below.

1 Use the INPUT SELECTOR knob to select CD, DVD, VIDEO2, or

VIDEO3.

2 Press the INPUT MODE key.

Each press switches the setting as follows:

In DTS play mode

1 D-AUTO (digital input, auto sound)

2 D-MANUAL (digital input, manual sound)

In DVD play mode

1 D-AUTO (digital input, auto sound)

2 D-MANUAL (digital input, manual sound)

3 6CH INPT (DVD 6CH input)

4 ANALOG (analog input, manual sound)

In other mode than DTS or DVD play mode

1 D-AUTO (digital input, auto sound)

2 D-MANUAL (digital input, manual sound)

3 ANALOG (analog input, manual sound)

Digital input:

Select this setting to play digital signals from a DVD, CD, or LD player.

Analog input:

Select this setting to play analog signals from a cassette deck, VCR,

or turntable.

Auto sound:

In the auto sound mode (AUTO SOUND indicator lights), the receiver

selects the listening mode automatically during playback to match the

type of input signal (Dolby Digital, PCM, DTS ) and the speaker setting.

The initial factory setting is auto sound on.

To keep the receiver set to the currently selected listening mode, use

the INPUT MODE key to select “D-MANUAL” (manual sound).

However, even when this setting is selected, there may be cases in

which the listening mode is selected automatically to match a Dolby

Digital source signal depending on the combination of listening mode

and source signal.

Setting up the system

INPUT SELECTOR

INPUT MODE

COAXIAL

DIGITAL

OUT

(AUDIO)

Connect the video signal and analog

audio signals to the VIDEO 2 jacks.

(See "Connecting video components".)

Component with an DTS, Dolby

Digital, or PCM OPTICAL

DIGITAL OUT

Connect the video signal and ana-

log audio signals to the VIDEO 3

jacks. (See "Connecting video

components".)

DOLBY DIGITAL RF

OUT (AUDIO)

COAXIAL DIGITAL OUT

(AUDIO)

OPTICAL DIGITAL OUT

(AUDIO)

LD player

RF digital

demodulator

(DEM-9991D)

(sold separately)

PCM OUT

CD player

Component with an DTS, Dolby

Digital, or PCM COAXIAL

DIGITAL OUT

Optical

fiber

cable

OPTICAL DIGITAL IN

(AUDIO)

MD player

OPTICAL DIGITAL OUT

(AUDIO)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 41 42

Comments to this Manuals

No comments

Kenwood KRF-V8030D User Manual Page 9

Comments to this Manuals

Related products and manuals for Remote control Kenwood KRF-V8030D