Kenwood KRF-V8010D User Manual download pdf (Page 14)

Preparations

KRF-V8010D (En/T)

Preparing for surround sound

Speaker settings

7 Press the SETUP key to accept the setting.

Turn on the receiver.

Select a speaker system.

1 Press the SETUP key to make the subwoofer setting indica-

tion (SUBW) appear.

2 Use the MULTI CONTROL (TUNING/SKIP) to select the appro-

priate subwoofer setting.

1 SUBW YES: A subwoofer is connected to the receiver.

2 SUBW NO: No subwoofer is connected to the receiver.

3 Press the SETUP key to accept the setting.

• The center speaker setting indication (CNTR) appears.

4 Use the MULTI CONTROL (TUNING/SKIP) to select the appro-

priate center speaker setting.

If you selected “YES” as the subwoofer setting.

1 CNTR YES: A center speaker is connected to the

receiver.

2 CNTR NO: No center speaker is connected to the

receiver.

If you selected “NO” as the subwoofer setting.

1 CNTR NML (normal): An average size center speaker is

connected to the receiver.

2 CNTR LRG (large): A large center speaker is con-

nected to the receiver.

3 CNTR NO: No center speaker is connected to

the receiver.

5 Press the SETUP key to accept the setting.

• The surround speaker setting indication (SURR) appears.

6 Use the MULTI CONTROL (TUNING/SKIP) to select the appro-

priate surround speaker setting.

1 SURR YES: Surround speakers are connected to the

receiver.

2 SURR NO: No surround speakers are connected to the

receiver.

Adjust the volume levels for the speakers.

• The receiver enters the speaker volume level adjustment mode.

• In steps 3 and 4, indications appear only for the selected

channels of the speakers that require adjusting.

Sit in your normal listening position and listen to the test tone. Adjust the

volume levels for the speakers until all speakers seem to be equally

loud.

1 Use the MULTI CONTROL (TUNING/SKIP) to adjust the volume

when the test tone is being output from the speaker channel to

be adjusted.

The test tone issues from the speakers for 1.5 seconds at a time

in the following sequence:

Lch = Cch = Rch = RS = LS = SW = Lch

• If you change the volume level settings for the speakers while

listening to music, the settings referred to on this page are also

changed. ∞

• If the speaker setting selects are changed, the speaker level

settings are reset.

2 Press the SETUP key.

• The receiver enters the mode for inputting the distance to the

speakers.

The channel indication blinks while the test tone is being output.

Input the distance to the speakers.

1 Measure the distance from the listening position to each of the

speakers.

Jot down the distance to each of the speakers.

Distance to front speakers: ____ feets (meters)

Distance to center speaker: ____ feets (meters)

Distance to surround speakers: ____ feets (meters)

2 Use the MULTI CONTROL (TUNING/SKIP) to select the distance

to the front speakers.

• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m), adjustable

in 1 foot (0.3 m) increments.

3 Press the SETUP key.

4 Repeat steps 2 and 3 to input the distance for each of the

speakers.

5 Setup is complete when the input indication reappears.

• The speakers you selected appear on the display. Confirm that all

the speakers have been correctly selected.

• If you used the remote control to perform the settings, press the

VIDEO key at this point to turn off the remote control’s own

adjustment mode. In this case, the input source is not switched.

The speaker indicator to be adjusted blinks.

Indication in feet Indication in meters

Display when all speakers have been selected.

To enable you to obtain optimum enjoyment from the receiver’s

listening modes, make sure to complete the speaker settings as

described below.

UBW ON



STEREO

NTR EsY



STEREO

)FT )M3

TUNING/SKIP

SETUP

VIDEO

MULTI CONTROL

SETUP

ch + dB1



1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments

Kenwood KRF-V8010D User Manual Page 14

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood KRF-V8010D