Kenwood KDC-4547UB User Manual download pdf (Page 8)

KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U

Function Setting

Perform configuration for this unit. You can set up

the following functions.

1 Select a source

Press the [SRC] button.

Items to be displayed vary depending on the selected

source. Refer to the function list shown later.

2 Enter Function Setting mode

Press the [VOL] button.

“FUNCTION” is displayed.

3 Select the Function item

Turn the [VOL] knob to display your desired

item, and then press the [VOL] knob.

Repeat the above operation to select the

function item to set.

Pressing the [ ] button allows you to go back

to the previous item.

4 Set the Function item

Turn the [VOL] knob to select your desired

setting, and then press the [VOL] knob.

5 Exit Function Setting mode

Press the [ ] button for at least 1 second.

Function item

Legend :

No.

Function name: “Function name displayed on

this unit” ➤ “Setting 1”*, “Setting 2”...

The function related to the selected function item is

described. For where it appears, refer to the

No.

given in

the function list.

⁄

• The setting marked with * is a factory setting.

• The function marked with *

is supported only by the

KDC-4547U.

• The function marked with *

is supported only by the

KDC-4547U/ KDC-4047U/ KDC-4047UM/ KDC-414U/

KDC-414UM.

¥ Clock Adjust: “CLOCK ADJ”/“CLOCK ADJUST”

Sets the clock

1. Turn the [VOL] knob to adjust the hour.

2. Press the [VOL] knob to finish the hour

adjusting. The minute display blinks.

3. Turn the [VOL] knob to adjust the minute.

4. Press the [VOL] knob to finish the minute

adjusting.

⁄

• You can do this adjustment when “TIME SYNC” is set to

“OFF”.

ø Synchronize the clock: “TIME SYNC” ➤

“ON”*,”OFF”

Synchronizing the RDS station time data and this

unit’s clock.

π Dimmer: “DIMMER SET” ➤ “ON”,”OFF”*

Adjusts the brightness of the display according to

the surrounding illumination.

[ Text Scroll: “TEXT SCROLL” ➤ “AUTO”,

”MANUAL”*

Scrolls the text display of CD, audio file and Radio

text.

Selecting AUTO scrolls them automatically.

“ Local Seek: “LOCAL SEEK” ➤ “ON”,”OFF”*

Only stations whose reception is good are

searched in auto seek tuning. (FM only)

] Seek Mode: “SEEK MODE” ➤

“AUTO1”*,”AUTO2”,”MANUAL”

Selects the tuning mode of the radio.

Tuning mode Display Operation

Auto seek “AUTO1” Automatic search for a station.

Preset station seek “AUTO2” Search in order of the stations in

the Preset memory.

Manual “MANUAL” Normal manual tuning control.

‘ Auto Memory: “AUTO MEMORY”

Memorizes six stations with good reception

automatically.

Selecting “YES” and then pressing the [VOL] knob

starts the auto memory operation.

⁄

• This setting can be made when “TYPE NORM”/“TYPE

NORMAL” is selected for the <Mixed Preset Memory

Switching> item.

\ Monaural Reception: “MONO SET” ➤

“ON”,”OFF”*

You can reduce the noise when stereo broadcasts

are received as monaural. (FM only)

« News: “NEWS SET” ➤ “OFF”*,”0”-”90”

Automatically receives news bulletin when it

starts. Set the time during which interrupt is to be

disabled after start of another news bulletin.

Changing “NEWS 00M” to “NEWS 90M” turns this

function ON.

If news bulletin starts when this function is ON,

“NEWS” is displayed and news is received. If

“20M” is has been set, reception of another news

bulletin will not start for 20 minutes.

The news bulletin volume is the same level that

was set for Traffic Information.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Kenwood KDC-4547UB User Manual Page 8

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Kenwood KDC-4547UB