Kenwood TM-D710GE User Manual download pdf (Page 95)

MCP-2A/6A Memory Control Program 08

Reading GPS Log Data

MCP‑6A can read GPS log data recorded on the TM‑D710GA/GE. The read GPS log data can be viewed with a map

software program.

This section describes how to read GPS log data.

Reading GPS Log Data from the TM-D710GA/GE

Select “Read GPS Logger Data from the Transceiver” from the Program pulldown menu. Data from a GPS Logger and

Waypoints can be read. Select the checkbox of the desired data. Pressing the “Read” button will start reading the data.

ThedataissavedasaNMEAle.

When the reading is complete, a screen appears to prompt you to select whether or not you want the GPS log data in

the transceiver to be deleted. The read data cannot be written onto the transceiver again.

Fig. 8-14 GPS Data Reading Screen

Managing the Read GPS Log Data

Whenthereadingiscomplete,theGPSlogdataissavedinNMEAleformatintheMCP-6Afolder.TheGPS Logger

windowshowsthesavedNMEAles.Thelename,youcanchoosePresenttime,Acquiredtime(UTC)fromAcquired

Time (Local Time).

TwotypesofNMEAlearecreated:alethatcontainsallthelogdatareadfromthetransceiverandalethatisdivided

into blocks. Stop the log to divide the data into blocks, while recording the log on the transceiver. For example, if you

wish to divide the log data into data for outward and return trips, stopping the logging once will divide the data into two

blocks.

The GPS LoggerwindowallowsconversionofNMEAlestoKMLorGPXles,ordeletionofthedata.

The GPS Logger window can be opened also from “GPS Logger” in the Tools pulldown menu.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 107 108

No comments

Kenwood TM-D710GE User Manual Page 95