Kenwood TM-D710GE User Manual download pdf (Page 66)

07 EchoLink

Adjusting Transmit Level

Adjust the level of the transmit audio that is sent from the microphone to the test server.

Select “Adjust Sound Device” > “Recording...” from the Tools pulldown menu.

Fig. 7-23 Transmit Level Menu Selection

To transmit, use the “Transmit” button on the EchoLink software screen or the [Space] key on your computer keyboard.

Press the “Transmit” button or [Space] key once to activate the transmit mode; press it again to return to receive mode.

Fig. 7-24 Adjusting Transmit Level

While transmitting, speak into the microphone using a normal level of voice. After returning to receive, your spoken

audio will be repeated back by the test server. Adjust the microphone level control until the returned audio sounds best.

Transmit to the test server and listen to the returned audio a couple of times. When you have completed setting the input

level, press the “Disconnect” button on the EchoLink software screen to disconnect from the test server.

Connecting with a Station

Fig. 7-25 Connecting with a Station

Connected stations are listed in the Station List of the Index View tab on the EchoLink software screen. The stations

are listed in order of repeater stations, link stations, single user stations (PC users) and conferences in the chart. First,

choose a single user station and connect to it. If connecting to a repeater station, link station or conference, before

pressingthespacebartotransmit,monitorsucientlytounderstandwhoelsemayalreadybeconnected.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 107 108

No comments

Kenwood TM-D710GE User Manual Page 66