Kenwood TM-D710GA User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 77
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
DUAL TONE MULTI-FREQUENCY (DTMF)
The keys on the microphone keypad function as DTMF keys; the 12 keys found on a push-button telephone plus 4 additional keys (A, B,
C, D). This transceiver provides 10 dedicated memory channels. You can store a DTMF code with up to 16 digits.
Some repeaters in the U.S.A. and Canada offer a service called Autopatch. You can access the public telephone network via such a
repeater by sending DTMF tones. For further information, consult your local repeater reference.
MANUAL DIALING
Manual Dialing requires only two steps to send DTMF tones.
1 Press and hold the microphone [PTT].
2 Press the keys in sequence on the keypad to send DTMF
tones.
The corresponding DTMF tones are transmitted.
If the DTMF Hold function is activated, you need not hold down
[PTT] while pressing keys. After transmitting the fi rst tone (by
pressing [PTT] and the fi rst key), pressing additional keys will
keep the transceiver in transmit mode for 2 seconds.
Frequency (Hz)
1209 1336 1447 1633
697
[1] [2] [3] [A]
770
[4] [5] [6] [B]
852
[7] [8] [9] [C]
941
[
]
[0] [#] [D]
DTMF Hold
Activate this function to remain in transmit mode, after
beginning to press keys when making a call.
1 Enter Menu mode and access Menu 300.
2 Set DTMF Hold to ON to continue transmitting when
pressing keys.
Set this menu to OFF to stop the 2 second continuous
transmission.
AUTOMATIC DIALER
There are 10 dedicated DTMF Memory channels available
to store DTMF codes. You can store up to 16 digits in each
channel.
Storing a DTMF Code in Memory
1 Enter Menu mode and access Menu 301.
2 Rotate the Tuning control to select a channel number.
3 Press the Tuning control to set the selected channel
number.
The name entry display appears.
4 Enter a name for the channel, the press the Tuning
control to set it.
The code entry display appears.
5 Enter a DTMF code for the channel, then press the
Tuning control to set it.
When a space is entered, it becomes a “Pause” code.
DTMF-1
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 76 77

Comments to this Manuals

No comments