7smoDINSTRUCTION MANUALVHF FM TRANSCEIVERTK-290UHF FM TRANSCEIVERTK-390KENWOOD CORPORATION ©B62-08le-20(K)(lilC)09 08 07 08 05 04 03 02
Key DescriptionsФ TX/Busy/Battery low indicatorLights red while transmitting. Lights green while receiving. Flashes red when the battery power is low
DisplayжSMMMMMM.' A sc« HON LO API AUX*^(3)i)(5)(6)(z) (a)® Alphanumeric displayDisplays the operating group or channel number, or the group or c
PROGRAMMABLE FUNCTIONSFiinotion NameiSelciotoL, Toggle , PF Keys ((D,Speaker/SWiliili (0)7 , rs', (9'),;^Microphone ;:PF KeysrAux 'zCha
Punction NameSeieW PF:K8ys(®.(|)r; Speaker/(r3.)Swiloti (©)71, 9i)IVIIcroplipne PF KeysNo Function/ yOperator Selectable Toney/Operator Selectable Pri
BASIC OPERATIONS Switching Power ON/OFFTo switch ON the transceiver, turn the Power switch/Volume control clockwise until it clicks.To switch OFF the
Selecting a ChannelTurn the Selector or press theChannel Up and Channel Downkeys to select a channel.• Use the Selector or PF keys, depending on which
KEY LOCKUse the key or switch programmed as Key Lock to activate the Key Lock function. When activated, only the PTT and toggle switch, the Selector,
For Priority Scan to function, the Priorityt or Priority2 channei must be programmed.• If only one of the priority channels are programmed, the trans
RedialingA maximum of 16 digits can be redialed. The last number dialed, either manually or automatically, will be redialed.To redial a number;1 Pr
Confirm:2 Press the memory channel keyTo confirm a stored number;(1 ~ 9) with the stored number you want to send.1 Press the # key.• The transceiver w
THANK YOU!We are grateful you chose KENWOOD for your land mobile radio applications. We believe this easy-to-use transceiver will provide dependable c
DEALER PROGRAMMABLE OPTIONStThe following|’list of functions can be enabled or disabled by your dealer:116
— -IPriority Channei Quick ScanBattery Warning ~Priorityl Temp. D/ABusy LEDPriorlty2 Temp. D/ATX LEDTemp. D/A Key Hold Time7 Segment LCD DisplayRevert
------ -------------------—r--------TOT Rekey Time* and ff Tone (Encode)TOT Reset TimeDTMF Side Tone (Encode)Group Delete/AddDTMF Hold Time (Encode)Ba
AUDIBLE USER FEEDBACK TONESThe transceiver outputs various tones to indicate the transceiver operating status.Power ON Tone Key Operation Tone End of
One or more of the following statements may be applicable:FCC WARNINGThis equipment generates or uses radio frequency energy. Changes or modificati
CONTENTSr ---------------------------------------------------------------------------------------------------------------UNPACKING AND CHECKINGAdjusti
UNPACKING AND CHECKING EQUIPMENTNote: The following unpacking Instniclions are for use by your KENWOOD dealer, an authorized KENWOOD sen/icB faciUfy,
The battery pack is not charged at the factory. Charge the pack before use. Repeat the charge/discharge cycles two or three times after purchase or ex
Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure.INSTALLING
INSTALLING THE SPEAKER/ MICROPHONE (OPTIONAL)1 Insert the guide of the speaker/ microphone connector into the groove on the transceiver universal con
GETTING ACQUAINTED
Comments to this Manuals