Kenwood TK-3401DE User Manual download pdf (Page 13)

INSTALLING THE CAP OVER THE SPEAKER/

MICROPHONE JACKS

Install the cap over the speaker/ microphone jacks when not

using an optional speaker/ microphone or headset.

Note:

◆ To keep the transceiver water resistant, you must cover the

speaker/ microphone jacks with the supplied cap.

1 Place the cap over the jacks so that the locking

tabs insert into the transceiver grooves.

2 While holding the cap in place, push it towards

the bottom of the transceiver until the tabs on

the cap click into place.

• To remove the cap, hold the top of the cap in

place with your ﬁ nger while inserting a 2 mm or

smaller ﬂ at blade screwdriver under the bottom

of the cap. Slowly slide the screwdriver in until its

tip touches the tab inside the cap, then gently pry

the cap up (handle of screwdriver moving away

from the transceiver) to remove the cap.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

No comments

Kenwood TK-3401DE User Manual Page 13