Kenwood TK-3301E User Manual download pdf (Page 17)

BASIC OPERATIONS

1 Turn the Power switch/ Volume control

clockwise to switch the transceiver power

ON.

• A beep sounds if enabled by your dealer.

2 Press the key programmed with the Monitor

or Squelch Off (Side 2 key default) function

to hear background noise, then rotate the

Power switch/ Volume control to adjust the

volume.

3 Rotate the Channel selector to select your

desired channel.

• When you receive an appropriate signal, you

will hear audio from the speaker.

4 To make a call, press and hold the PTT

switch, then speak into the microphone using

your normal speaking voice.

• Hold the microphone approximately 3 to 4 cm

(1.5 inches) from your lips.

5 Release the PTT switch to receive.

Note: When the battery pack voltage becomes too low, transmission

will stop and an alert tone will sound.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

No comments

Kenwood TK-3301E User Manual Page 17